Accessories for Valves, Housings and Manifolds

HP10-20 — Hand Pump
  Valve Housings & Accessories Contents page.
  Selection guide - Hand Pumps.
  PDF file of this page.
  STP file for HP10-20.
  Request a quote.

HP10-20 Hand Pump Valve

SYMBOL:
HP10-20 Valve symbol

DESCRIPTION
A screw-in, cartridge-style, push and release type hand pump with two built-in checks.

OPERATION
The HP10-20 will provide a specific displacement of oil to port 1.
Note: As with any mechanical hydraulic actuator (piston rods, rotating pump shaft, etc.)
the shaft will become coated with a minute amount of oil from the internal high pressure system.
The rod protruding from the hand pump may feel damp with oil after use. This is desirable because
the oil coating serves to lubricate the shaft seal, reducing friction and assuring extended seal life.

FEATURES
• Hardened parts for long life.
• Heavy duty construction.
• Industry-common cavity.

RATINGS
Operating Pressure: Port 1 up to 207 bar (3000 psi); Port 2 up to 69 bar (1000 psi)
Displacement: 1.36 cc (0.083 cu. in.) per stroke
Force Required: 30 lbs. to attain 17 bar (250 psi)
Internal Leakage: From port 1 to port 2: 0.15 cc per minute (3 drops per minute) maximum
  at 207 bar (3000 psi)
Mechanical Pull Effort Required at Rated Pressure: 7.3 kg. (16.0 lbs.)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
   -26 to 204°C (-15 to 400°F) with fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2, Variation 'A'; See page 9.110.1_2w
Cavity Tool: CT10-2xx; See page 8.600.1
Seal Kit: SK10-2x-T; See page 8.650.1

DIMENSIONS:

HP10-20 Valve Dimensions

MATERIAL:S

Cartridge: Weight: 0.27 kg (0.60 lb);
Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O-rings and back-ups standard. Anodized aluminum knobs.

Standard Ported Body: Weight:
0.16 kg (0.35 lb) Anodized high-strength
aluminum alloy, rated to 207 bar
(3000 psi). Ductile iron bodies available; dimensions may differ.
See page 8.010.1_2w
  ORDERING CHART:

HP10-20 Ordering Chart

Valve Housings & Accessories Contents page PDF file of this page.  
Selection guide - Hand Pumps.
STP file for HP10-20 Request a quote.