Accessories for Valves, Housings and Manifolds
HP10-21 — Hand Pump
Valve Housings & Accessories Contents page.
Selection guide - Hand Pumps.
PDF file of this page.
STP file for HP10-21.
Request a quote.
A screw-in, cartridge-style, push- or pull-type hand pump with two built-in
The HP10-21 provides hydraulic flow to 0.65 cu. in. per stroke, at pressures
to 207 bar (3000 psi). Integral suction and outlet checks provide a compact
device which delivers true operational system flows. See chart for handle
Note: As with any mechanical hydraulic actuator (piston rods, rotating
pump shaft, etc.) the shaft will become coated with a minute amount of oil
from the internal high pressure system. The rod protruding from the hand
pump may feel damp with oil after use. This is desirable because the oil
coating serves to lubricate the shaft seal, reducing friction and assuring
extended seal life.
• Hardened parts for long life.
• Handle Beam rotates 360°.
• Push or pull linkage standard.
• Displacement up to 10.6 cc (0.65 cu in.) per stroke.
• Heavy duty construction.
• Industry-common cavity.
Operating Pressure: 207 bar (3000 psi)
Flow: Up to 10.6 cc (0.65 cu. in.) per stroke
Leakage: At outlet check, 5 drops/minute
Suction Pressure: 193 mm Hg (7.6 in. Hg, 104 in. H2O) less than
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
-26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities
of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2; See page 9.110.1_2w
Cavity Tool: CT10-2xx; See page 8.600.1
Seal Kit: SK10-2x-T; See page 8.650.1
Handle Kit: 16 in. handle, 2.65 kg. (1.2 lbs.),
Part no. 6502340; Must be ordered separately
Cartridge: Weight: 0.86 kg. (1.9 lbs.); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O-rings and back-ups standard. Anodized aluminum knobs.
Standard Ported Body: Weight:
0.16 kg. (0.35 lbs.) Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar
(3000 psi). Ductile iron bodies available; dimensions may differ. See page 8.010.1_2w
|Valve Housings & Accessories Contents page||PDF file of this page.|
|Selection guide - Hand Pumps.
||STP file for HP10-21||Request a quote.|