- Services & Support
- Sales & Distribution
Directional Valves — HyPerformance
HCV42-M20 — Check Valve, High Pressure
Selection guide - similar valves.|
PDF file of this page.
STP file for HCV42-M20.
Request a quote.
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device in high
pressure applications up to 350 bar (5075 psi).
The HCV42-M20 allows flow passage from 1 to 2, while normally blocking oil flow in the opposite
direction. The cartridge has a fully guided poppet which is spring-biased closed until sufficient
pressure is applied at 1 to open to 2.
• Hardened seat for long life and low leakage.
• Optional bias springs for back-pressure application flexibility.
• All HyPerformance products are tested to the rigorous standards of the NFPA specification T2.6.1.
• All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Note: All HyPerformance products are tested for 900K cycles at 350 bar and 100K at 420 bar.
Fatique Rating: 2 million cycles at 420 bar
Burst Pressure: 1380 bar (20000 psi)
Flow: Up to 303 lpm (80 gpm)
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. at 350 bar (5075 psi)
Temperature: -54° to 107°C (-65° to 275°F) with Urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC42-M2; See page 9.142.1_2w
Cavity Tool: HCT42-M2xx; See page 8.600.1
Seal Kit: SK42-M2x-x; See page 8.650.1
Cartridge: Weight: 0.68 kg. (1.50 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; PPDI Urethane seals with no backup rings standard.
Ported Body: Weight: 7.21 kg.
(15.89 lbs.); H-series ductile iron standard. Rated to 345 bar (5000 psi).
See page 8.042.1_2w.
|Selection guide - similar valves.||PDF file of this page.||STP file for HCV42-M20.||Request a quote.|