- Services & Support
- Sales & Distribution
Directional Valves — HyPerformance
HCV16-30 — Check Valve
Features and Benefits|
Selection guide - similar valves.
PDF file of this page
Request a quote
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding
device in high pressure applications.
The HCV16-30 allows flow from 1 to 2 or 3 while normally blocking flow in the
opposite direction. The cartridge has a fully guided poppet which is spring-biased
to stay closed until sufficient pressure is applied at 1 to open to 2 or 3.
• Hardened seat for long life and low leakage.
• Optional bias springs for back-pressure application flexibility.
• All HyPerformance products are tested to the rigorous standards of the NFPA specification T2.6.1
• All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Note: All HyPerformance products are tested for 900K cycles at 350 bar and 100K at 420 bar.
Flow: 151 lpm (40 gpm)
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Internal Leakage: 0.25 ml/minute (5 drops/minute) at 350 bar (5075 psi)
Temperature: -54° to 107°C (-65° to 225°F) with urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC16-2; See page 9.116.1_2w
Cavity Tool: HCT16-2XX; See page 8.600.1
Seal Kit: SK16-2U-0; See page 8.650.1
Cartridge:Weight: 0.32 kg. (0.70 lbs.) Steel with hardened work surfaces. Zinc-nickel plated exposed surfaces. PPDI Urethane seals without back-up rings standard.
Standard Ported Body: Weight: 3.96 kg.
(8.75 lbs.); H-series ductile iron standard. Rated to 345 bar (5000 psi). See page 8.016.1_2w
|Selection guide - similar valves
||Features and Benefits||PDF file of this page||Request a quote|