Directional Valves

PCV10 — Check, Pilot-to-Open

  Selection guide - similar valves.
  PDF file of this page
  Request a quote

PCV10 Valve

PCV10 Valve symbol

An in-line housed, pilot-operated, hydraulic check valve for use in
blocking or load-holding circuits.

The PCV10 allows flow from B to A, while normally blocking flow from A to B.
Flow will be allowed from A to B when pressure is applied at X.
This valve has a 4:1 pilot ratio, meaning that at least one-fourth of the load pressure
held at A is required at X to open the valve.
The check is spring-biased at 2 bar (30 psi) to assure holding in static or no-load conditions.
A sealed pilot piston option with check spring bias of 6.9 bar (100 psi) is available.

• Hardened seat for long life and low leakage.
• Optional sealed pilot piston.
• Optional spring ranges.
• Check section is serviceable as a cartridge.

Operating Pressure: 240 bar (3500 psi)
Flow: up to 60 lpm (16 gpm)
Maximum Internal Leakage at 240 bar (3500 psi):
A to B: 0.25 cc/minute (5 drops/minute)
   B to X without sealed piston: 245 cc/minute (15 cu. in./minute)
Pilot Ratio: 4:1
Check Spring Bias: 2.07 bar (30 psi); with sealed piston option: 6.9 bar (100 psi)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
   -26 to 204°C (-15 to 400°F) with fluorocarbon seals.
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Seal Kit (for CV10-20): SK10-2x-T; See page 8.650.1
   Piston Seal: See Dimension Drawing
Pilot Piston Service Part Numbers:
   O-Ring (1): Buna 6001014; Fluorocarbon 6003014
   Back-ups (2): Buna 6011014; Fluorocarbon 6011014


PCV10 Valve Performance Chart
PCV10 Valve Dimensions


Cartridge (CV10-20): Weight: 0.08 kg
(0.17 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O-rings and polyester elastomer back-ups standard.

Pilot Piston:
Hardened Steel.

Standard Ported Body: Anodized high-strength 6061 T6 aluminum alloy, rated to
207 bar (3000 psi). Ductile iron bodies available; dimensions may differ; consult factory.

Product Weight: 0.5 kg (1.10 lb).

PCV10 Ordering Chart

Selection guide - similar valves.
PDF file of this page. Request a quote.