- Services & Support
- Sales & Distribution
LS08-30 — Load Shuttle, Ball-Type
Selection guide - similar valves.|
PDF file of this page.
STP file for LS08-30.
Request a quote.
A load-shuttling, screw-in, cartridge-style, hydraulic check valve for use in
blocking circuits where a priority of flow/direction is given to a higher pressure
circuit over a lower one.
The LS08-30 will allow flow from the higher pressure of 1 or 3 port to the 2 port.
The valve is commonly used to direct oil from the pressure side of a bidirectional
hydraulic motor to a pressure-released hydraulic brake.
• Rapid response to load direction changes.
• Compact size.
Operating Pressure: 241 bar (3500 psi)
Proof Pressure: 390 bar (5700 psi)
Flow: Up to 19 lpm (5 gpm)
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
-26 to 204°C (-15 to 400°F) with fluorocarbon seals
Filtration: Recommend 25µ nominal or better; See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-3; See page 9.108.1_3w
Cavity Tool: CT08-3xx; See page 8.600.1
Seal Kit: SK08-3x-MM; See page 8.650.1
Cartridge: Weight: 0.08 kg (0.17 lb);
Steel with Zinc-plated exposed surfaces; Buna N O-rings and back-ups standard.
Standard Ported Body: Weight:
0.27 kg (0.60 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi). Ductile iron bodies available; dimensions may differ.
See page 8.008.1_3w
|Selection guide - similar valves.
||PDF file of this page.||STP file for LS08-30.||Request a quote.|