- Services & Support
- Sales & Distribution
PD10-32 — Piloted, 2-Way, Spool, Internal Vent, Normally Closed
Selection guide - similar valves.|
PDF file of this page
STP file for PD10-32
Request a quote
A screw-in, cartridge-style, pilot-operated, spool-type, normally-closed hydraulic
directional valve for two-way circuits requiring remote pilot actuation.
In neutral (unpiloted), the PD10-32 blocks flow between 2 and 3.
The spring bias chamber is internally vented to 3. On remote pilot
signal at 1, the valve shifts to open 2 to 3.
• Hardened spool and cage for long life.
• Industry common cavity.
Operating Pressure: 240 bar (3500 psi)
Proof Pressure: 390 bar (5700 psi)
Flow: up to 38 lpm (10 gpm)
Maximum Internal Leakage at 207 bar (3000 psi): 82 cc/minute (5 cu. in./minute)
Pilot Pressure Required to Full Spool Shift:
for 4.1 bar (60 psi) spring: 4.7 bar (68.2 psi)
for 7.6 bar (110 psi) spring: 8.6 bar (125 psi)
Oil Volume Required to Full Shift: 0.65 cc (0.04 cu. in.)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
-26 to 204°C (-15 to 400°F) with fluorocarbon seals.
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110.1_3w
Cavity Tool: CT10-3xx; See page 8.600.1
Seal Kit: SK10-3x-MM; See page 8.650.1
Cartridge: Weight: 0.15 kg (0.34 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.
Standard Ported Body:
Weight: 0.36 kg (0.80 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to
207 bar (3000 psi). Ductile iron bodies available; dimensions may differ.
See page 8.010.1_3w
|Selection guide - similar valves.
||PDF file of this page.||STP file for PD10-32.||Request a quote.|