- Services & Support
- Sales & Distribution
PD10-41 — Piloted, 3-Way, Spool Valve, Internal Vent
Selection guide - similar valves.|
PDF file of this page
STP file for PD10-41
Request a quote
A screw-in, cartridge-style, pilot-operated, spool-type, hydraulic directional valve for
three-way circuits requiring remote pilot actuation.
In neutral (unpiloted), the PD10-41 allows flow from 3 to 4 while blocking at 2.
On remote pilot signal at 1, the valve shifts to allow flow between 3 and 2 while blocking at 4.
Since 4 is common to the spring chamber, pressure on 4 will directly (1:1) affect the pilot
pressure required, and must always be added to the bias spring value.
Note: Consult factory for applications where bi-directional flow is required when the valve is
in the normal or spring-offset position.
• Hardened spool and cage for long life.
• Industry common cavity.
Operating Pressure: 240 bar (3500 psi)
Proof Pressure: 350 bar (5075 psi)
Flow: up to 45 lpm (12 gpm)
Maximum Internal Leakage at 207 bar (3000 psi): 82 cc/minute (5 cu. in./minute)
Pilot Pressure Required:
To Spool Crossover: with 4.1 bar (60 psi) Spring: 4.7 bar (68.2 psi)
with 7.6 bar (110 psi) Spring: 7.6 bar (110 psi)
To Full Spool Shift: with 4.1 bar (60 psi) Spring: 5.2 bar (75 psi)
with 7.6 bar (110 psi) Spring: 8.6 bar (125 psi)
Oil Volume Required to Full Shift: 0.65 cc (0.04 cu. in.)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
-26 to 204°C (-15 to 400°F) with fluorocarbon seals.
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-4; See page 9.110.1_4w
Cavity Tool: CT10-4xx; See page 8.600.1
Seal Kit: SK10-4x-MMM; See page 8.650.1
Cartridge: Weight: 0.16 kg (0.35 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.
Standard Ported Body:
Weight: 0.34 kg (0.75 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to
207 bar (3000 psi). Ductile iron bodies available; dimensions may differ.
See page 8.010.1_4w
|Selection guide - similar valves.
||PDF file of this page.||STP file for PD10-41.||Request a quote.|