- Services & Support
- Sales & Distribution
Directional Valves — HyPerformance
HPD16-45 — Piloted 2-Way Spool
Selection guide - similar valves.|
PDF file of this page
Request a quote
A high pressure, screw-in, cartridge-style, piloted, spool-type, 2-way hydraulic
directional valve with remote pilot actuation.
In neutral (unpiloted), the HPD16-45 allows flow from 2 to 3 bidirectionally. On remote
pilot signal at port 1, the valve's spool shifts to block flow from ports 2 to 3. The spring
chamber is vented to port 4. Pressure at port 4 will directly (1:1) affect the pilot pressure
required and must be added to the bias spring value.
• Hardened spool and cage for long life.
• Optional sealed pilot.
• Industry common cavity.
• All HyPerformance products are tested to the rigorous standards of the NFPA specification T2.6.1.
• All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Note: All HyPerformance products are tested for 900K cycles at 350 bar and 100K at 420 bar.
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow: 170 lpm (45 gpm)
Internal Leakage: At 350 bar (5075 psi) at 32 cSt, from Port 3 to 4: 250 ml/min.
(15 cu. in./min.) and from Port 3 to 2: 500 ml/minute (30 cu. in./minute) max.
Cycle Life: One million cycles
Operating Temperature: -54 to 107°C (-65 to 225°F) with urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC16-4; See page 9.116_4w
Cavity Tool: HCT16-4XX; See page 8.600.1
Seal Kit: SK16-4U-000 (Urethane); See page 8.650.1
Cartridge: Weight: 0.82 kg. (1.8 lbs.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Urethane seals without back-up rings standard.
|Selection guide - similar valves.
||PDF file of this page.||Request a quote.|