- Services & Support
- Sales & Distribution
PD16-S60N — Piloted, 4-Way, Spool-Type Valve
Selection guide - similar valves.|
PDF file of this page
STP file for PD16-S60N
Request a quote
A screw-in, cartridge-style, pilot-operated, 4-way, spool-type,
hydraulic directional valve.
In neutral position, the PD16-S60N allows flow between ports 2 and 3 and from 4 to 5.
On remote pilot signal at 1, the valve shifts to allow flow between ports 3 and 4, and
from 2 to 5. The spring chamber is vented to the tank through port 6. The vented spring
chamber allows the valve to be fully pressurized at ports 1, 2, 3, 4 and 5 without affecting
required pilot pressure. Pressure at 6 will affect required pilot pressure.
• Hardened spool and cage for long life.
• 60, 80, 110 and 170 psi bias springs available.
Operating Pressure: 240 bar (3500 psi)
Flow: up to 95 lpm (25 gpm)
Maximum Internal Leakage: at 207 bar (3000 psi): 164 ml/minute (10 cu. in./minute)
Pilot Pressure Required: 4.1 bar (60 psi) minimum
Oil Volume Required to Full Shift: 1.5 cc (0.09 cu. in.)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
-26 to 204°C (-15 to 400°F) with fluorocarbon seals;
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC16-S6; See page 9.116.1_6w
Cavity Tool: CT16-S6xx; See page 8.600.1
Seal Kit: SK16-S6x-BMMMM; See page 8.650.1
Cartridge: Weight: 0.25 kg (0.55 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.
Ported Body: Consult factory.
|Selection guide - similar valves.
||PDF file of this page.||STP file for PD16-S60N.||Request a quote.|