Directional Valves

PD42-S60N — Piloted, 2-Position, 4-Way, Spool-Type Valve
  Selection guide - similar valves.
  PDF file of this page.
  STP file for PD42-S60N.
  Request a quote.

PD42-S60N Valve

PD42-S60N Valve symbol

A screw-in, cartridge-style, pilot-operated, 2-position, 4-way, spool-type,
hydraulic directional valve.

In neutral position, the PD42-S60N allows flow between ports 2 and 3 and from 4 to 5.
On remote pilot signal at 1, the valve shifts to allow flow between ports 3 and 4, and
from 2 to 5.
The spring chamber is vented to the tank through port 6. The vented spring
chamber allows the valve to be fully pressurized at ports 2, 3, and 4 without affecting
required pilot pressure. Pressure at 6 will affect required pilot pressure.

• Hardened spool and cage for long life.
• Optional sealed spool.

Operating Pressure: Ports 2, 3 and 4: 324 bar (4700 psi);
   Port 1: 207 bar (3000 psi)
Burst Pressure: 1241 bar (18000 psi)
Flow: up to 189 lpm (50 gpm)
Maximum Internal Leakage: at 207 bar (3000 psi): 1.31 liters/minute (80 cu. in./minute)
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals
   -54° to 107°C (-65° to 225°F) with polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC42-S6; See page 9.142.1_6w
Cavity Tool: CT42-S6xx; See page 8.600.1
Seal Kit: SK42-S6x-BMMMM; See page 8.650.1


PD42-S60N Valve Performance Chart

PD42-S60N Valve Dimensions


Cartridge: Weight: 1.6 kg. (3.5 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.

Ported Body: Ductile iron, rated to
345 bar (5000 psi).
See page 8.042.1_6w

PD42-S60N Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for PD42-S60N Request a quote.