- Services & Support
- Sales & Distribution
PD10-S62 — Piloted, 4-Way, Spool-Type Valve
Selection guide - similar valves.|
PDF file of this page
STP file for PD10-S62
Request a quote
A screw-in, cartridge-style, pilot-operated, 4-way, spool-type, hydraulic
directional valve with vented spring chamber.
In neutral position, the PD10-S62 allows flow between ports 2 and 3 and
between ports 4 and 5 bidirectionally. When the remote pilot signal at 1
exceeds the force of the bias spring, the spool shifts to block flow at all ports.
The spring chamber is vented to the tank through port 6. The vented spring
chamber allows the valve to be fully pressurized at ports 1, 2, 3, 4 and 5
without affecting required pilot pressure. Pressure at 6 will affect required
• Hardened spool and cage for long life.
• Optional sealed spool between ports 1 and 2.
Maximum Operating Pressure: 250 bar (3625 psi)
Maximum Total Input Flow: 53 lpm (14 gpm) in any combination of flows between
ports 2 and 3, and ports 4 and 5 (e.g., 2 &12 gpm, 7 & 7 gpm, or 10 & 4 gpm).
Maximum Internal Leakage: at 250 bar (3625 psi): 131 ml/minute (8 cu. in./minute)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
-26 to 204°C (-15 to 400°F) with fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-S6; See page 9.110.1_6w
Cavity Tool: CT10-S6x; See page 8.600.1
Seal Kit: SK10-S6x-BMMMM; See page 8.650.1
Cartridge: Weight: 0.20 kg (0.45 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.
Ported Body: Consult factory.
|Selection guide - similar valves.
||PDF file of this page.||STP file for PD10-S62.||Request a quote.|