Directional Valves

PD16-S63 — Piloted, 4-Way, Spool-Type Valve
  Selection guide - similar valves.
  PDF file of this page
  STP file for PD16-S63
  Request a quote

PD16-S63 Valve

SYMBOL:
PD16-S63 Valve symbol

DESCRIPTION
A screw-in, cartridge-style, pilot-operated, 4-way, spool-type, hydraulic directional valve.

OPERATION
In neutral position, the PD16-S63 blocks flow at all ports. On remote pilot signal at 1,
the valve shifts to allow flow between ports 2 and 3, and between 4 and 5.
The spring chamber is vented to the tank through port 6. The vented spring chamber
allows the valve to be fully pressurized at ports 1, 2, 3, 4 and 5 without affecting required
pilot pressure. Pressure at 6 will affect required pilot pressure.

FEATURES
• Hardened spool and cage for long life.
• Optional sealed spool between ports 1 and 2.

RATINGS
Operating Pressure: 240 bar (3500 psi)
Flow: up to 151 lpm (40 gpm)
Maximum Internal Leakage: at 207 bar (3000 psi): 164 ml/minute (10 cu. in./minute)
Pilot Pressure Required: 4.1 bar (60 psi) minimum
Oil Volume Required to Full Shift: 1.5 cc (0.09 cu. in.)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
   -26 to 204°C (-1° to 400°F) with fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC16-S6; See page 9.116.1_6w
Cavity Tool: CT16-S6xx; See page 8.600.1
Seal Kit: SK16-S6x-BMMMM; See page 8.650.1

PERFORMANCE:



PD16-S61N Valve Performance Chart

  DIMENSIONS:

PD16-S63 Valve Dimensions

MATERIALS:

Cartridge: Weight: 0.75 kg (1.66 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.

Ported Body: Consult factory.
  ORDERING CHART:

PD16-S63 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for PD16-S63. Request a quote.