- Services & Support
- Sales & Distribution
Directional Valves — HyPerformance
HPD16-S67C — Piloted, 4-Way, Spool-Type Valve
Selection guide - similar valves.|
PDF file of this page
Request a quote
A high-pressure, screw-in, cartridge-style, pilot-operated, 4-way, spool-type, hydraulic directional valve.
When the HPD16-S67C is in neutral position, all ports are blocked. When remote pilot signal at 1, exceeds force of bias spring, the spool shifts to allow flow from 3 to 4 and from 2 to 5. When remote pilot signal at 6 exceeds force of bias spring, the spool shifts to allow flow from 3 to 2 and from 4 to 5.
• Hardened spool and cage for long life.
• 110 and 170 psi bias springs available.
• All HyPerformance™ products are tested to the rigorous standards of the NFPA specification
T2.6.1 and are tested at a verification level of 90% and an assurance of 99%.
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Note: All HyPerformance products are tested for 900K cycles at 350 bar and 100K at 420 bar
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow: 95 lpm (25 gpm); See Performance Chart
Maximum Internal Leakage: at 350 bar (5075 psi): 330 ml/minute (20 cu. in./minute)
Temperature: -40° to 100°C (-40° to 212°F) with Buna N seals;
-26° to 204°C (-15° to 400°F) with Fluorocarbon seals;
-54° to 107°C (-65° to 225°F) with standard PPDI Urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Note: Adaptor lock kit HF P/N 4207540 (sold spearately) may be require when pilot pressure
exceeds 35 bar (500 psi).
Cavity: HV16-S6; See page 9.116.1_6w
Cavity Tool: HCT42-S6xx; See page 8.600.1
Seal Kit: HSK16-S6U-00000 (PPDI Urethane); See page 8.650.1
Cartridge: Weight: 1.0 kg. (2.2 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.
Ported Body: Weight: 9.13 kg.
(20.14 lbs.); H-series ductile iron standard. Rated to 345 bar (5000 psi). See page 8.016.1_6w
|Selection guide - similar valves.
||PDF file of this page.||Request a quote.|