Directional Valves — HyPerformance
HPD42-S67C — Piloted, 4-Way, Spool-Type Valve
Selection guide - similar valves.|
PDF file of this page
Request a quote
A high-pressure, screw-in, cartridge-style, pilot-operated, 4-way, spool-type, hydraulic directional valve.
When the HPD42-S67C is in neutral position, all ports are blocked. When remote pilot signal at 1,
exceeds force of bias spring, the spool shifts to allow flow from 3 to 4 and from 2 to 5. When
remote pilot signal at 6 exceeds force of bias spring, the spool shifts to allow flow from 3 to 2 and
from 4 to 5.
• Hardened spool and cage for long life.
• Flows up to 379 lpm/100 gpm.
• 1000 hour salt spray tested.
• Vibration tested (3-axis) to 20G RMS.
• All HyPerformance™ products are tested to the rigorous standards of the NFPA specification
T2.6.1 and are tested at a verification level of 90% and an assurance of 99%.
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Note: All HyPerformance™ products are tested for 900K cycles at 350 bar and 100K at 420 bar
Fatique Rating: 2 million cycles at 420 bar/6090 psi
Burst Pressure: 1380 bar (20000 psi)
Flow: 189 lpm (50 gpm): See Performance Chart
Maximum Internal Leakage: at 350 bar (5070 psi): 820 ml/minute (50 cu. in./minute)
Temperature: -40° to 100°C (-40° to 212°F) with Buna N seals;
-26° to 204°C (-15° to 400°F) with Fluorocarbon seals;
-54 to 107°C (-65 to 225°F) with standard PPDI Urethane seals
Ambient Temperature: -40 to 90°C (-40 to 194°F)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Note: Adaptor lock kit HF P/N 4207540 (sold spearately) may be require when pilot pressure
exceeds 35 bar (500 psi).
Cavity: HVC42-S6; See page 9.142.1_6w
Cavity Tool: HCT42-S6xx; See page 8.600.1
Seal Kit: HSK42-S6U-00000 (PPDI Urethane); See page 8.650.1
Cartridge: Weight: 2.0 kg. (405 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.
Ported Body: Weight: 16.61 kg.
(36.62 lbs.); H-series ductile iron standard. Rated to 345 bar (5000 psi).
See page 8.042.1_6w
|Selection guide - similar valves.
||PDF file of this page.||Request a quote.|