Directional Valves — HyPerformance

HPE42-S52 — Piloted, Proportional, Spool-Type Valve
   Selection guide - similar valves.
   PDF file of this page.
   Request a quote.

HPE42-S52 Valve

SYMBOL:
HPE42-S52 Valve symbol

DESCRIPTION
A high pressure, proportional, pilot-operated, screw-in, cartridge-style, spool-type, hydraulic directional valve.

OPERATION
When in neutral the HPE42-S52 blocks flow between all ports. On remote pilot signal at 1, the valve’s spool shifts proportionally to the applied pilot pressure to gradually open all ports. The spring chamber is vented to the tank
through port 5. Pressure at port 5 will increase the required pilot pressure at a 1:1 ratio.

FEATURES
• Hardened spool and cage for long life.
• Optional sealed spool.
• All HyPerformance products are tested to the rigorous standards of the NFPA specification T2.6.1.
• All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.

RATINGS
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
   Note: All HyPerformance products are tested for 900K cycles at 350 bar and 100K at 420 bar.
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow: 170 lpm (45 gpm)
Internal Leakage: 410 ml/minute (25 cu. in./minute) at 350 bar (5075 psi)
Operating Temperature: -54° to 107°C (-65° to 225°F) with PPDI Urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC42-S5; See page 9.142.1_5w
Cavity Tool: HCT42-S5XX; See page 8.600.1
Seal Kit: HSK42-S5U-0000 (Urethane); See page 8.650.1

PERFORMANCE:

HPE42-S52 Valve Performance Charts

DIMENSIONS:

HPE42-S52 Dimensions

MATERIALS:

Cartridge: Weight: 2.0 kg. (4.4 lbs.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. PPDI Urethane seals without back-up rings standard.

Ported Body: Weight: 14.12 kg. (31.14 lbs.);
H-series ductile iron standard. Rated to
345 bar (5000 psi). See page 8.042.1_5w.
  ORDERING CHART:

HPE42-S52 Ordering Chart

Selection guide - similar valves.
PDF file of this page. Request a quote.