Directional Valves — HyPerformance

HPE16-S67H — Piloted, Proportional, Spool-Type Valve
   Selection guide - similar valves.
   PDF file of this page.
   Request a quote.

HPE16-S67H Valve

U.S. Patent 6,554,014

SYMBOL:
HPE16-S67H Valve symbol

DESCRIPTION
A screw-in, cartridge-style, pilot-operated, spring-centered, spool-type, hydraulic directional valve
with neurtral position bleed-to-tank.

OPERATION
In neutral position, the HPE16-S67H blocks port 3 while ports 2, 4, and 5 are in communication
with each other. When the remote pilot signal at 1 exceeds the force of the bias spring, the spool
shifts proportionally to the applied pilot pressure to allow flow from 3 to 4, through a load such as a
hydraulic cylinder or motor, and from 2 to 5 and to tank. Port 5 is to be used as a tank port only
with maximum pressure of 69 bar (1000 psi). On remote pilot signal at 6, the spool shifts
proportionally to the applied pressure in the opposite direction, thus reversing the flow direction.
The valve’s spool is symmetrical, providing meter-in and meter-out control.

FEATURES
• Hardened spool and cage for long life.
• Cost-effective cavity.
• Excellent metering characteristics.
• Good Linearity.
• All HyPerformance™ products are tested to the rigorous standards of the NFPA specification
  T2.6.1 and are tested at a verification level of 90% and an assurance of 99%.

RATINGS
Max. Operating Pressure: Ports 2, 3, 4: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi);
   Ports 1 and 6 (pilot): 35 bar (500 psi); Port 5 (tank): 69 bar (1000 psi)
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow: 95 lpm (25 gpm)
Maximum Internal Leakage: at 350 bar (5075 psi): 500 ml/minute (30 cu. in./minute)
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals;
   -54° to 107°C (-65°F to 225°F) with Polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC16-S6; See page 9.116.1_6w
Cavity Tool: HCT16-S6xx; See page 8.600.1
Seal Kit: HSK16-S6U-0000; See page 8.650.1

PERFORMANCE:

HPE16-S67H Performance


DIMENSIONS:
HPE16-S67H Valve Dimensions

MATERIALS:

Cartridge: Weight: 1.1 kg.
(2.4 lbs.); Steel with hardened work surfaces. Zinc-plated exposed surfaces. Urethane seals without back-ups standard.

Ported Body: Weight: 9.13 kg.
(20.14 lbs.) H-series ductile iron standard. Rated to 345 bar
(5000 psi). See page 8.016.1_6w
  ORDERING CHART:

HPE16-S67H Ordering Chart

Selection guide - similar valves.
PDF file of this page. Request a quote.