- Services & Support
- Sales & Distribution
EV10-S34 — Vented, Spool-Type, Directional Element
Selection guide - similar valves.|
PDF file of this page.
STP file for EV10-S34.
Request a quote.
A spool-type, screw-in, cartridge-style, hydraulic directional element, with multifunction
potential when used with other directional, pressure, or flow control devices.
The EV10-S34 is a spring-biased blocking valve which will shift to allow full flow from
1 to 2 only when port 3 is vented to create a pressure drop across the internal orifice
which exceeds the pressure of the bias spring force. EV10-S34 is a vent-to-open directional valve.
• Multiple function/application potential.
• Low pressure drop.
• Smooth shift transition.
• Industry-common cavity.
Operating Pressure: Cartridge only: 345 bar (5000 psi) with polyurethane seals;
Aluminum housing: 207 bar (3000 psi); Ductile iron housing: 345 bar (5000 psi)
Flow: Up to 76 lpm (20 gpm)
Internal Leakage: 164 ml per minute (10 cu. in. per minute) at 207 bar (3000 psi)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
-26 to 204°C (-15 to 400°F) with Fluorocarbon seals;
-54 to 107°C (-65 to 225°F) with Polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-S3; See page 9.110.1_3w
Cavity Tool: CT10-S3xx; See page 8.600.1
Seal Kit: SK10-S3x-MM; See page 8.650.1
Cartridge: Weight: 0.15 kg (0.32 lbs)
Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N
O-rings and polyester elastomer back-ups standard.
Ported Body: Weight: 0.32 kg (0.70 lb) Anodized high-strength aluminum alloy, rated to 207 bar (3000 psi). Ductile iron bodies are available for pressures up to
350 bar (5000 psi); Weight and dimensions may differ.
See page 8.010.1_3w
|Selection guide - similar valves.
||PDF file of this page.||STP file for EV10-S34||Request a quote.|