Directional Valves

MV06-20 — Manual Release Valve
   Selection guide - similar valves.
   PDF file of this page.
   STP file for MV06-20.
   Request a quote.

MV06-20 Valve

MV06-20 Valve symbol

A thumb or cam-operated, screw-in, cartridge-style, two-way, normally-closed poppet-type
directional valve.

The MV06-20 blocks flow in the 2 to 1 flow path until applied thumb or cam force is sufficient to
overcome the spring bias plus load force.

• Hardened seat and poppet for long life.
• Stainless steel cam button.

Operating Pressure: 241 bar (3500 psi)
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow: 15 lpm (4 gpm)
Internal Leakage: 5 drops/minute (0.25 ml/min.) at 3500 psi (241 bar)
Required Thumb or Cam Force for Operation Port 2 Loaded:
  No load: 3.6 kgs. (8 lbs.)
  69 bar (1000 psi): 7.3 kgs. (16 lbs.)
  138 bar (2000 psi): 9.1 kgs. (20 lbs.)
  241 bar (3500 psi): 11.4 kgs. (25 lbs.)
Temperature: -40 to 100°C (-40 to 212°F) with Buna N seals;
  -15 to 400°C (-26 to 204°F) with fluorocarbon seals;
  -54 to 107°C (-65 to 225°F) with polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC06-2, Variation ‘A’; See page 9.106.1_2w
Cavity Tool: CT06-2; See page 8.600.1
Seal Kit: SK06-2x-T; See page 8.650.1


MV06-20 Valve Performance Chart
MV06-20 Valve Dimensions


Cartridge: Weight: 0.03 kg.
(0.07 lbs.) Stainless steel pin. Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N O-rings and back-up standard.

Standard Ported Body: Weight: 0.23 kg. (0.51 lbs.). Anodized high-strength
aluminum alloy, rated to 241 bar
(3500 psi). See page 8.006.1

MV06-20 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for MV06-20. Request a quote.