- Services & Support
- Sales & Distribution
MP08-34 — Manual, Spring Return, Pull-to-Shift Valve
Selection guide - similar valves.|
PDF file of this page.
STP file for MP08-34.
Request a quote.
A manual, 3-way, pull-to-shift, spring-return, screw-in hydraulic directional valve.
In its steady-state, spring-offset position, the MP08-34 blocks flow from 2 to 3.
In the actuated (pulled) position, the cartridge directs flow from 3 to 2.
The spring chamber is vented at 1. When released, the valve returns to its steady state.
Note: Pressure at port 1 will directly act on the spool and spring.
Port 1 is intended to be a tank port only.
• Hardened spool and cage for long life.
• Pressure to 14 bar (200 psi) on port 1.
• Optional rotational lock position.
• Compact, industry-common cavity.
Operating Pressure: Port 3 to 2: 240 bar (3500 psi) max.; Port 1: 14 bar (200 psi) max.
Proof Pressure: 350 bar (5075 psi)
Flow: Up to 38 lpm (10 gpm)
Internal Leakage: 33 cc/minute (2 cu. in./minute) max. at 207 bar (3000 psi)
Mechanical Pull Effort Required: 7.3 kg. (17 lbs.) installed;
8.6 kg. (19 lbs.) to travel 3.2 mm (0.125 in.); 9.1 kg. (20 lbs.) to detent
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
-26 to 204°C (-15 to 400°F) with fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-3; See page 9.108.1_3w
Cavity Tool: CT08-3xx; See page 8.600.1
Seal Kit: SK08-3x-MT; See page 8.650.1
Cartridge: Weight: 0.23 kg (0.50 lb);
Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O-rings and polyester elastomer back-ups standard. Plastic knob optional.
Standard Ported Body: Weight:
0.27 kg (0.60 lb) Anodized high-strength
6061 T6 aluminum alloy, rated to 207 bar (3000 psi). Ductile iron bodies available; dimensions may differ.
See page 8.008.1_3w
|Selection guide - similar valves.
||PDF file of this page.||STP file for MP08-34||Request a quote.|