- Services & Support
- Sales & Distribution
Electronic and Electro-Hydraulic Controls
CoreTek Model ECUs – General Purpose Machine Controllers for Off-Highway, Mobile Equipment
HydraForce Electronics Guide (all models) – PDF file
Electronic Vehicle Controls – Intro. & Contents
Valve Coils and Valve Controllers – Contents
Request a quote
Programming Software:HydraForce ECUs can be programmed with HF-Impulse or CoDeSys software.
• HF-Impulse: is an easy to use configuration platform developed by HydraForce that installs on top of the CoDeSys environment. It allows you to flash devices with the latest firmware, change controller “personality” and configure all parameters for operation. First used with HydraForce proportional valve drivers, HF-Impulse is now available for use with the ECU-0809 Electronic Control Unit.
• CoDeSys or Controlled Development System: is a complete development environment for PLCs. CoDeSys puts the powerful IEC language into the hands of the PLC programmer, enabling a simple approach to application development. All HydraForce electronic ECU controllers can be programmed using HF-Impulse or CoDeSys.
All software is free and can be downloaded from the HydraForce Electronics Portal, www.hydraforce.com/Electronics/
HydraForce ECUs are general-purpose programmable controllers that can be used as stand-alone controllers or integrated with other CAN networked devices. These controllers are designed to withstand the environmental demands of mobile off-highway equipment applications. They feature flexible input and output configuration and are capable of driving up to 3.0 amps per output pin.
|Model ECU-0809; Part No. 4000350; Inputs/Outputs - 21 Total
See full information page for ECU-0809
Inputs and outputs can be configured in multiple ways, Up to 17 inputs - digital, pulse, or analog,
Up to 8 PWM outputs with 4 current feed backs
|Model ECU-0710; Part No. 4000351; Inputs: 20; Outputs: 7
See full information page for ECU-0710
Up to 20 inputs consisting of Digital, Pulse, Current Measuring Feedback and Analog inputs.
Up to 7 outputs consisting of up to 6 PWM or digital high-side drivers, and a single low-side driver.
|Model ECU-2415; Part No. 4000352; Inputs: 39; Outputs: 24
See full information page for ECU-2415
Up to 39 inputs consisting of Digital, Pulse, Current Measuring Feedback and Analog inputs.
Up to 24 outputs consisting of up to 24 PWM or digital high-side drivers.
|Model ECU-2820; Part No. 4000356; Inputs: 52; Outputs: 28
See full information page for ECU-2820
Up to 52 inputs consisting of Digital, Pulse, Current Measuring Feedback and Analog inputs.
Up to 28 outputs consisting of up to 24 PWM or digital high-side drivers, and up to 4 digital low side drivers.
|Model ECU-3233A; Part No. 4000343; Inputs: 33; Outputs: 32
See full information page for ECU-3233A
Up to 33 inputs consisting of Digital, Pulse, Current Measuring Feedback and Analog.
Up to 32 outputs consisting of 8 PWM and up to 8 digital low-side drivers.
|Need help designing a custom manifold for your machine?
Visit us at: http://info.hydraforce.com/Free-Custom-Circuit-Consultation
or email us at: HydraulicSupport@hydraforce.com
|Electronic Vehicle Controls – Intro. & Contents||HydraForce Electronics Guide (all models) – PDF file|
|Valve Coils and Valve Controllers – Contents||Request a quote|