- Services & Support
- Sales & Distribution
Electronic and Electro-Hydraulic Controls
Opus A6F and A6S Wachendorff Display Units
Features and Benifits|
PDF file of this page
Request a quote
The Opus A6F and A6S displays are cost-efficient, rugged operator control panels for use on heavy-duty vehicles and work machines that must operate outdoor in harsh conditions. They are fully equipped with an encoder, three hard and twelve soft-function keys, integrated buzzer, RS232 and USB ports, CAN bus and video inputs. The A6F (full-featured) unit has more memory, analog/digital inputs, digital outputs, Ethernet, and 3 video inputs for use with a camera to monitor process operations.
Display: Sunshine-readable thin film transistor (TFT) color graphic LCD.
800 x 480 pixel resolution, viewing angle ±50°, 7 inch (177 mm) diagonal
screen. Light gray plastic housing with black rubber frame; glass front with
anti-reflective glass. Model A6F has a touch screen..
Mounting: Can be mounted in landscape mode; stand-alone or on
dashboard. To mount stand-alone, use the 4-bushing M5 of the rear panel
with the A3 adaptor cover Part #4000412. To mount on dashboard use Part
Keypads: Left keypad has six soft keys with white arrow symbols on a
black base with blue backlighting. Right keypad has six soft keys plus three
hard keys for "ESC", "Home" and "Settings"; three status LEDs and one-
multi-color LED. Light sensor embedded in keypad automatically adjusts
backlighting to level of ambient light.
Encoder: Electromechanical with mechanical detents and push mechanism
rated for 1-million activations without electronic
Processor: 32-bit, 532 MHz, I.MX35
Memory: 128/256 MB DDR2; 512 MB Mass Storage; 64 MB RAM,
32 kB serial EEPROM.
(Model A6F only) 1 GB Mass Storage; 128 MB RAM
Operating System: Embedded Linux.
Programming: Wachendorff Projektor-Tool for Windows NT/2000/XP
supporting CANopen, Generic driver, CANfreestyle, J1939.
Interfaces: 2 CANbus ISO 11898, CAN specification 2.0 B active.
1 RS-232 (RxD, TxD, GND only), EIA-level.
1 USB 2.0 full speed on main connector.
(Model A6F only) 4 analog or digital inputs (selectable via software)
3 digital outputs, 1 USB 2.0 high speed on front
Ethernet 10/100 Mbit.
Wireless: Optional Bluetooth® 2.0, Class 2
Video Interface: Video overlay with video layer for background;
Camera control output; 1 composite CCITT video input
(Model A6F only) 3 composite CCITT video input.
Real-Time Clock: Buffered for 2 weeks by gold cap, accuracy ±4 seconds/day.
Connectors: Main connector: AMP Super Seal, 26-pin. USB on main
connector. Audio: Out-interface on main connector. Stereo. AC97
compatible with output power of approximately 50 mW.
(Model A6F only) USB A on front panel; Ethernet: 4-pole round
connector, M12, D-coded; Video: 5-pole round connector, M12, B-coded.
Power Supply: Maximum tolerable 8 to 36 VDC.
Environmental: Operating Temperature: - 30 to 65°C (-22 to 149°F).
Storage Temperature: - 40 to 85°C (-40 to 185°F).
Protection: IP67 and IP65 (true outdoor).
Vibration: 5g @ 57 to 2000 Hz, 150 h per axis.
Shock: 30g, 11ms, 10x per axis.
Certification: e1 and CE; ISO 15003; ISO 16740-4 Climatic Loads C.
DIMENSIONS & MOUNTING:
NOTE: Model A6F shown above. Dimensions, mounting and overall form/appearance apply to both A6F and A6S models (except as noted).
Model A6S (Standard Model): Part No. 4000407
Model A6F (Full-Featured Model): Part No. 4000408
Power Cable: Part No. 4000403
Video Cable: Part No. 4000411
Mounting Kit: Part No. 4000412
Dashboard Mounting Kit: Part No. 4000413
Connector Plug: Part No. 4000415
Socket Contacts: Part No. 4002658 (50 pc)
Cavity Plugs: Part No. 4002659 (50 pc)
Software License Key: Part No. 4100098
Note: Wachendorff displays can be programmed without a software license in Demo mode only. The software (Wachendorff Toolchain) can be downloaded free from the HydraForce Electronics Portal but the software license key must be purchased.
CONNECTOR PIN ASSIGNMENTS: