Electronic Controls

Valve Sensor Options
  PDF file of this page.
  Email us ref. Valve Sensor Options
  Request a quote.

INTEGRAL POSITION SENSOR — EMI/RFI CE-RATED

HydraForce offers a Hall Effect style integral position sensor for selected cartridge valves. Hall Effect sensors are known for proven reliability in the field and are a cost-effective way to add sensing capability to a hydraulic control valve circuit.

This sensing element is compatible with two-position, on/off solenoid cartridge valves, including the 10-size spool and poppet valves, the 12-size poppet valves, 16-size poppet valve, and the 58-size poppet valves. It can be specified with both normally open and normally closed valve models.

Because the sensor is installed below the coil, it can still be used with valves that have a manual override.

• CE Rated for global application.

• Burst, endurance and pressure ratings same as standard models
  without the sensor.

• Ability to use manual override.

• Compatible with 58-size, 10-size, 12-size, and 16-size two-position poppet and spool valves.
  Refer to individual valve ordering information for availability.
POSITION SENSOR RATINGS

Neutral Sensing
Supply Voltage (Vcc): +4.5 to +28 VDC
Output Voltage with Target Present: Vcc
Output Clamp Current: 40 mA min. to 65 mA max. for Vcc up to 28V
Connectors: Deutsch DT04-4P: Part No. 4001960, M12-4P
IP Rating: IP67
Mechanical Shock: 50 Gs, 11 ms half-sine
ESD: Nondestructive, ±15 KV Air Discharge
EMI: 20 MHz to 1 GHz, up to 100 V/m
Operating Temperature: -40°C to 110°C (-40°F to 230°F)
VALVE SENSOR WIRING

Sensor Wiring
Mating connector:
DT06-4S: Part No. 4001953

Mating connector:
M12-4S: Available from www.turck.com or www.binder.com

INSTALLATION AND APPLICATION NOTES

Installation
This valve is fully assembled at the factory. Improper installation, by applying torque to the wrong element of this assembly, can cause damage to the internal components affecting operation. To ensure trouble-free operation, follow these installation steps:

  1. Thread valve into appropriate cavity.
  2. Torque valve, turning adapter only (hex closest to the cavity).
      See table for tool size and torque.
  3. Install coil and coil nut.
  4. Position coil to orient connector.
  5. Torque coil nut to 5–7 ft•lb (7–9 N•m).
  6. Rotate sensor housing to align connector if necessary.

Sensor Wiring
  Sensor Wiring
  Cartridge size
Adapter tool size
Torque
  SV58   1 in hex   19–21 ft•lb (26–28 N•m)
  SV10   1 in hex   24–28 ft•lb (33–35 N•m)
  HSV10   1 in hex   75–85 ft•lb (102–115 N•m)
  SV12   1.25 in hex   33–37 ft•lb (45–50 N•m)
  HSV12   1.25 in hex   115–125 ft•lb (156–170 N•m)
  SV16   1.5 in hex   46–54 ft•lb (63–73 N•m)
Application
The position sensor requires a voltage supply between 4.5 and 28 Vdc, and a ground connection. It has a normally closed and a normally open output. Both outputs are pulled-down. The output changes state as the valve shifts. Output clamp current is 40 mA min. to 65 mA max.

Sensor Wiring
TYPICAL DIMENSIONS for 10 Size Valve with Sensor

SV10-P20A_22A Valve Dimensions

 

SV10-P20A
See catalog page 1.016.1 for more info.
including complete ordering info.

SV10-P22A
See catalog page 1.044.1 for more info.
including complete ordering info.

SV10-P23A Valve Dimensions

 

SV10-P21A
See catalog page 1.032.1 for more info. including complete ordering info.

SV10-P23A
See catalog page 1.053.1 for more info. including complete ordering info.
SV10-P20A_22A Valve Dimensions

 

SV10-P40
See catalog page 1.407.1 for more info.
including complete ordering info.

 

TYPICAL DIMENSIONS for 12 Size Valve with Sensor

SV10-P20A_22A Valve Dimensions

 

SV12-P20A
See catalog page 1.018.1 for more info. including complete ordering info.

SV12-P22A
See catalog page 1.045.1 for more info. including complete ordering info.

SV12-P23A Valve Dimensions

 

SV12-P21A
See catalog page 1.035.1 for more info. including complete ordering info.

SV12-P23A
See catalog page 1.054.1 for more info. including complete ordering info.

 

TYPICAL DIMENSIONS for 16 Size Valve with Sensor

SV58-P20A Valve Dimensions

 

SV16-P22A
See catalog page 1.046.1 for more info. including complete ordering info.
TYPICAL DIMENSIONS for 58 Size Valve with Sensor

SV58-P20A Valve Dimensions

 

SV58-P20A
See catalog page 1.025.1 for more info. including complete ordering info.

 

PDF file of this page. Email us ref. Valve Sensor Options. Request a quote.