Flow Control Valves

NV10-22 — Needle Valve, Lockable
  Selection guide - similar valves.
  PDF file of this page.
  STP file for NV10-22.
  Request a quote.

NV10-22 Valve

NV10-22 Valve symbol

A screw-in, cartridge-style, variable orifice, hydraulic flow restrictor valve that requires only
5-1/2 turns for full adjustment.

The NV10-22 increases its orifice value from fully-closed to fully-open with counterclockwise
adjustment rotation. Effective adjustment is linear over the 5-1/2 turn adjustment range.
Settings are lockable in any position.

• Adjustments cannot be backed out of the valve.
• Desired settings may be locked down.
• Hardened parts for long life.
• Positive shut-off.
• Linear adjustment.
• Industry-common cavity.

Operating Pressure at Inlet: 241 bar (3500 psi)
Flow: 57 lpm (15 gpm) nominal at 11 bar (160 psi) at full open 5.5 turns
Internal Leakage: 0.05 cc/minute (1 drop/minute) max. at shut-off
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2; See page 9.110.1_2w
Cavity Tool: CT10-2xx; See page 8.600.1
Seal Kit: SK10-2x-M; See page 8.650.1


NV10-22 Valve Performance Chart

NV10-22 Valve Dimensions


Weight: 0.15 kg. (0.33 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups
standard. Anodized aluminum knobs.

Standard Ported Body: Weight: 0.16 kg.
(0.35 lbs.); Anodized high-strength 6061
T6 aluminum alloy, rated to 207 bar (3000 psi);
Ductile iron bodies available; dimensions
may differ. See page 8.010.1_2w.

NV10-22 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for NV10-22 Request a quote.