- Services & Support
- Sales & Distribution
Flow Control Valves
FC10-20 — Flow Control with Reverse Flow Check
Selection guide - similar valves. |
PDF file of this page.
STP file for FC10-20.
Request a quote.
A screw-in, cartridge-style, variable orifice, hydraulic flow control valve with reverse flow check.
The FC10-20 increases its orifice value from fully-closed to fully-open with counterclockwise
Adjustments cannot be backed out of the valve.
Desired settings may be locked down.
Hardened parts for long life.
Aluminum knob option.
Operating Pressure: 241 bar (3500 psi)
Flow: 45 lpm (12 gpm) nominal at 7 bar (100 psi) at full open 3.0 turns
Internal Leakage: 0.50 cc/minute (10 drops/minute) max. at shut-off
Adjustment Torque Required: 0.34 Nm (3 inch-pounds) at 7 bar (100 psi);
4.5 Nm (40 inch-pounds) at 207 bar (3000 psi)
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
-26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2; See page 9.110.1_2w
Cavity Tool: CT10-2xx; See page 8.600.1
Seal Kit: SK10-2x-M; See page 8.650.1
Cartridge: Weight: 0.17 kg. (0.37 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups
standard. Anodized aluminum knobs.
Standard Ported Body: Weight: 0.16 kg.
(0.35 lbs.); Anodized high-strength 6061
T6 aluminum alloy, rated to 207 bar
(3000 psi); Ductile iron bodies available;
dimensions may differ.
See page 8.010.1_2w.
|Selection guide - similar valves.
||PDF file of this page.||STP file for FC10-20||Request a quote.|