Flow Control Valves
FR08-20F — Flow Regulator, Pressure Compensated
Selection guide - similar valves.|
PDF file of this page.
STP file for FR08-20F.
Request a quote.
A screw-in, cartridge-style, fixed orifice, pressure-compensated, hydraulic flow regulating valve
The FR08-20F maintains a constant flow rate from port 1 to port 2 regardless of load pressure
changes. Reverse flow returns through the control orifice and is non-compensated.
Hardened parts for long life.
Quiet, modulated response.
Compact, industry-common cavity.
Operating Pressure: 241 bar (3500 psi)
Proof Pressure: 345 bar (5000 psi)
Burst Pressure: 896 bar (13000 psi)
Flow Settings: 0.2 lpm (0.05 gpm) minimum, 7.5 lpm (2.0 gpm) maximum
Standard Compensator Bias Spring: 5.5 bar (80 psid) differential
Flow Maintenance Setting Range: 0.2 to 1.8 lpm (0.05 to 0.49 gpm) to accuracy of ±15%;
1.9 to 7.5 lpm (0.5 to 2.0 gpm) to accuracy of ±10%
Temperature: -40 to 100° C (-40 to 212° F) with Buna seals;
-26 to 204° C (-15 to 400° F) with Fluorocarbon seals;
-54 to 107° C (-56 to 225° F) with polyurethane seals.
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-2; See page 9.108.1_2w
Cavity Tool: CT08-2xx; See page 8.600.1
Seal Kit: SK08-2x-M; See page 8.650.1
Cartridge: Weight: 0.09 kg
(0.20 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O-rings and fluorocarbon back-ups standard.
Standard Ported Body: Weight: 0.16 kg (0.35 lb); Anodized high-strength aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.
See page 8.008.1_2w.
|Selection guide - similar valves.
||PDF file of this page.||STP file for FR08-20F||Request a quote.|