- Services & Support
- Sales & Distribution
Flow Control Valves
FR16-20F — Flow Regulator, Pressure Compensated
Selection guide - similar valves.|
PDF file of this page.
STP file for FR16-20F.
Request a quote.
A screw-in, cartridge-style, fixed orifice, pressure-compensated, hydraulic flow regulating
valve (restrictive type).
The FR16-20F maintains a constant flow rate out of port 2 regardless of load pressure
changes in the circuit downstream of port 2.
The fixed control orifice is factory preset to customer flow specification. The valve begins to
respond to load changes when the flow through the valve creates a pressure differential across
the control orifice greater than 5.5 bar (80 psid), with accurate flow maintenance from 7.6 to
240 bar (110 to 3500 psid). Reverse flow (2 to 1) returns through the control orifice and is non-
Hardened parts for long life.
Quiet, modulated response.
Operating Pressure: 240 bar (3500 psi)
Flow Settings: 4 lpm (1 gpm) minimum, 113 lpm (30 gpm) maximum
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
-26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC16-2; See page 9.116.1_2w
Cavity Tool: CT16-2xx; See page 8.600.1
Seal Kit: SK16-2x-M; See page 8.650.1
Cartridge: Weight: 0.41 kg. (0.92 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.
Standard Ported Body: Weight: 0.57 kg.
(1.25 lbs.); Anodized high-strength 6061 T6
aluminum alloy, rated to 207 bar (3000 psi);
Ductile iron bodies available; dimensions may differ. See page 8.016.1_2w.
|Selection guide - similar valves.
||PDF file of this page.||STP file for FR16-20F||Request a quote.|