Flow Control Valves

FR12-30F — Flow Regulator, Pressure Compensated
  Selection guide - similar valves.
  PDF file of this page.
  STP file for FR12-30F.
  Request a quote.

FR12-30F Valve

FR12-30F Valve symbol

A screw-in, cartridge-style, non-adjustable, pressure-compensated, hydraulic flow regulating
valve intended for use in fixed displacement hydraulic circuits requiring partial pump flow
diversion on a priority basis.

The FR12-30F maintains a constant flow rate out of port 3 regardless of load pressure changes
in the circuit downstream of port 3, or in the bypass leg at 2.
The valves spool maintains a constant differential pressure of 6.5 bar (95 psi) across a fixed
internal orifice, thereby regulating the hydraulic flow rate from 1 to 3.
The FR12-30F is a priority type regulator, delivering the pump flow to 3 first, then bypassing
excess to 2.
All ports may be fully pressurized.
Flow out of priority port 3 may vary based on input flow amount, particularly with lower
temperatures and increased fluid viscosities. Settings may need to be established through
correlation study. Consult factory.

• Hardened parts for long life.
• Quiet, modulated response.
• Cost-effective cavity.

Operating Pressure: 240 bar (3500 psi)
Flow Rate: 49.2 lpm (13.0 gpm) max. regulated; 94.6 lpm (25.0 gpm) max. input
Standard Compensator Bias Spring: 6.5 bar (95 psid) differential
Flow Maintenance Setting Range: 3.8 to 11.4 lpm (1.0 to 3.0 gpm) to accuracy of 15%;
   11.4 to 45.4 lpm (3.0 to 12.0 gpm) to accuracy of 10%
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC12-3; See page 9.112.1_3w
Cavity Tool: CT12-3xx; See page 8.600.1
Seal Kit: SK12-3x-MM; See page 8.650.1


FR12-30F Flow vs. Pressure

  DIMENSIONS:FR12-30F Valve Dimensions


Weight: 0.30 kg. (0.68 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.

Standard Ported Body:
Weight: 0.98 kg. (2.15 lbs.); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.
See page 8.012.1_3w

FR12-30F Ordering

Selection guide - similar valves.
PDF file of this page. STP file for FR12-30F Request a quote.