Flow Control Valves

FR10-32 — Flow Regulator, Orifice-Adjustable, Bi-Directional
  Selection guide - similar valves.
  PDF file of this page.
  STP file for FR10-32.
  Request a quote.

FR10-32 Valve
U.S. Patent 6,167,906

SYMBOL:
FR10-32 Valve symbol

DESCRIPTION
A screw-in, cartridge-style, manually-operated, pressure-compensated, bi-directional,
hydraulic flow regulating valve. An internal compensator spool provides compensated flow
across the proportional orifice regardless of flow direction.

OPERATION
The FR10-32 provides regulated flow in both directions, from port 2 to port 3, or from port 3 to port 2.
Port 1 should be blocked. Regulated flow increases from closed to fully open with clockwise rotation.
The valve will maintain the set flow rate regardless of pressure variations at each of the ports.

FEATURES
• Hardened seat for long life and low leakage.
• Various adjustment options.
• Excellent linearity and hysteresis.
• Adjustable orifice.
• Bi-directional.
• Industry-common cavity.

RATINGS
Operating Pressure: Inlet: 240 bar (3500 psi)
Proof Pressure: 345 bar (5000 psi)
Burst Pressure: 896 bar (13000 psi)
Rated Inlet Flow Rate: 19 lpm (5.0 gpm)
Internal Leakage: 0.38 ml/minute (0.10 gpm) maximum
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110.1_3w
Cavity Tool: CT10-3xx; See page 8.600.1
Seal Kit: SK10-3x-MM; See page 8.650.1
Knob Kit: Part No. 6113160

PERFORMANCE:

FR10-32 Flow vs. Pressure


DIMENSIONS:

FR10-32 Valve Dimensions

MATERIALS:

Cartridge:
Weight: 0.30 kg (0.68 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O-rings and polyester elastomer back-ups standard.

Standard Ported Body:
Weight: 0.36 kg (0.80 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ. See page 8.010.1_3w
  ORDERING CHART:

FR10-32 Ordering


Selection guide - similar valves.
PDF file of this page. STP file for FR10-32 Request a quote.