Flow Control Valves

EC10-30 — Flow Regulator, Pressure Compensated
  Selection guide - similar valves.
  PDF file of this page.
  STP file for EC10-30.
  Request a quote.

EC10-30 Valve

EC10-30 Valve symbol


A screw-in, cartridge-style, pressure-compensating element, intended for use with a
remote fixed or variable orifice to yield a two-port-type, pressure-compensated, flow
regulating hydraulic valve.

The EC10-30 maintains a constant flow rate from 2 regardless of load pressure changes in
the circuit downstream of 2.
The cartridge maintains a constant differential pressure from circuit point P to port 3,
thereby regulating the hydraulic flow rate between the two points in the circuit.

• Hardened parts for long life.
• Quiet, modulated response.
• Industry-common cavity.

Operating Pressure: 207 bar (3000 psi)
Flow Rate: 30.3 lpm (8.0 gpm) maximum
Standard Compensator Bias Spring: 5.5 bar (80 psi)
Flow Maintenance: ±10% from 0.38 to 38 lpm (0.1 to 10 gpm)
   at pressures from 5.5 to 207 bar (80 to 3000 psi)
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110.1_3w
Cavity Tool: CT10-3xx; See page 8.600.1
Seal Kit: SK10-3x-TB; See page 8.650.1




EC10-30 Flow vs. Pressure



EC10-30 Valve Dimensions



Cartridge: Weight: 0.11 kg (0.25 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups

Standard Ported Body: Weight: 0.36 kg
(0.80 lb); Anodized high-strength 6061 T6
aluminum alloy, rated to 207 bar (3000 psi);
Ductile iron bodies available; dimensions
may differ. See page 8.010.1_3w



EC10-30 Ordering