Flow Control Valves

EC10-40 — Flow Regulator, Pressure Compensator
  Selection guide - similar valves.
  PDF file of this page.
  STP file for EC10-40.
  Request a quote.

EC10-40 Valve

EC10-40 Valve symbol


A screw-in, cartridge-style, pressure-compensating element, intended for use with a remote fixed or
variable orifice to yield a three-port, bypass-type, pressure-compensated, flow regulating hydraulic valve.

The EC10-40 maintains a constant flow rate from 3 regardless of load pressure changes in the circuit
downstream of 3.
The cartridge maintains a constant differential pressure from circuit point P to port 3 (see valve symbol),
thereby regulating the hydraulic flow rate between the two points in the circuit. The EC10-40 is a priority
type regulator, delivering pump flow first to 3, then bypassing excess to 2. All ports may be fully

• Hardened parts for long life.
• Quiet, modulated response.
• Industry-common cavity.

Operating Pressure: 207 bar (3000 psi) maximum
Flow Rate: 38 lpm (10 gpm) max. regulated; 57 lpm (15 gpm) max. input;
   EC10-40 inlet pressure begins to rise over compensating pressure
   when bypass oil exceeds 26 lpm (7 gpm)
Standard Compensator Bias Spring: 5.5 bar (80 psid)
Flow Maintenance: 0.38 to 1.86 lpm (0.1 to 0.49 gpm) settings ±20%;
   1.89 to 5.64 lpm (0.5 to 1.49 gpm) settings ±15%;
   5.68 to 37.85 lpm (1.5 to 10 gpm) settings ±10%
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-4; See page 9.110.1_4w
Cavity Tool: CT10-4xx; See page 8.600.1
Seal Kit: SK10-4x-TMB; See page 8.650.1




EC10-40 Flow vs. Pressure



EC10-40 Valve Dimensions



Cartridge: Weight: 0.16 kg (0.35 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups

Standard Ported Body: Weight: 0.34 kg
(0.75 lb); Anodized high-strength 6061
T6 aluminum alloy, rated to 207 bar
(3000 psi); Ductile iron bodies available;
dimensions may differ.
See page 8.010.1_4w



EC10-40 Ordering