Flow Control Valves

EC10-43 — Pressure Compensator, Priority-on-Demand with Dynamic Load Sense
  Selection guide - similar valves.
  PDF file of this page.
  STP file for EC10-43.
  Request a quote.

EC10-43 Valve

EC10-43 Valve symbol


A screw-in, cartridge-style, priority-on-demand, pressure-compensator with a dynamic load
sense, intended to provide priority flow in the required amount, while allowing excess flow to be
used for auxiliary functions.

With inlet at port 3, the EC10-43 will deliver required priority flow at 4, regardless of load
Excess flow exits at 2. Port 1 is the load sense port. All ports may be fully pressurized.

• Priority-on-demand.
• Dynamic load sense.
• Hardened parts for long life.
• Quiet, modulated response.
• Industry-common cavity.

Operating Pressure: Inlet: 240 bar (3500 psi) maximum
Input Flow Rate: 45.4 lpm (12 gpm) maximum
Maximum Regulated Flow: 34.1 lpm (9 gpm) with 10.3 bar (150 psi) compensator spring;
   26.0 lpm (7.0 gpm) with 5.5 bar (80 psi) compensator spring
Flow Maintenance: See performance chart
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-4; See page 9.110.1_4w
Cavity Tool: CT10-4xxx; See page 8.600.1
Seal Kit: SK10-4x-MMM; See page 8.650.1




EC10-43 Flow vs. Pressure



EC10-43 Valve Dimensions



Cartridge: Weight: 0.16 kg (0.35 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups

Standard Ported Body:
Weight: 0.34 kg
(0.75 lb); Anodized high-strength aluminum
alloy, rated to 207 bar (3000 psi); Ductile iron
bodies available; dimensions may differ.
See page 8.010.1_4w



EC10-43 Ordering