Pressure Control Valves

PS10-30 — Sequence with Internal Pilot and Vent
Selection guide - similar valves.
PDF file of this page.
STP file for PS10-30.
Request a quote.

PS10-30 Valve

SYMBOL:
PS10-30 Valve symbol

DESCRIPTION
A screw-in, cartridge-style, direct-acting, spool-type, hydraulic sequence valve
with internal pilot and spring chamber drain, designed to direct oil to a secondary
circuit once a pre-determined pressure level is attained in the primary circuit.

OPERATION
In its steady state, the PS10-30 blocks flow at 1, while allowing flow to pass from 2 to 3.
On attainment of a pre-determined pressure at 1, the cartridge shifts to open 1 to 2.

FEATURES
• Adjustments cannot be backed out of the valve.
• Adjustments prohibit springs from going solid.
• Optional spring ranges to 144.8 bar (2100 psi).
• Hardened spool and cage for long life.
• Industry-common size.

RATINGS:
Operating Pressure: up to 207 bar (3000 psi)

Flow: up to 38 lpm (10 gpm); see performance chart
Internal Leakage: Port 1 to 2: 82 cc/minute (5 cu. in/minute) maximum to
   85% of nominal setting
Standard Spring Ranges: 2.8 to 27.6 bar (40 to 400 psi);
   14.5 to 144.8 bar (210 to 2100 psi)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
   -26 to 204°C (-15 to 400°F) with fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110_3w
Cavity Tool: CT10-3xx; See page 8.600.1
Seal Kit: SK10-3x-BB; See page 8.650.1

PERFORMANCE:

PS10-30 Flow Pressure


PS10-30 Flow Pressure   DIMENSIONS:
PS10-30 Valve Dimensions

MATERIALS:

Cartridge: Weight: 0.27 kg (0.60 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard. Anodized aluminum knobs and caps.

Standard Ported Body:
Weight: 0.36 kg (0.80 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ. See page 8.010_3w.

Adjustment Option Details:
See page 6.003.1
  ORDERING CHART:

PS10-30 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for PS10-30. Request a quote.