Pressure Control Valves

PS10-32 — Sequence with External Pilot, Internal Drain
Selection guide - similar valves.
PDF file of this page.
STP file for PS10-32.
Request a quote.

PS10-32 Valve

PS10-32 Valve symbol

A screw-in, cartridge-style, direct-acting, spool-type, hydraulic sequence
valve with external pilot and internal spring chamber drain.

In its steady state, the PS10-32 blocks flow from 3 to 2. On attainment of a
pre-determined pressure at 1, the valve shifts to open 3 to 2. Back pressure
at 2 will have a direct (1:1) effect on the valve's setting because the spring
chamber is vented out 2.

• Adjustments cannot be backed out of the valve.
• Adjustments prohibit springs from going solid.
• Optional spring ranges to 144.8 bar (2100 psi).
• Hardened spool and cage for long life.
• Industry-common size.

Operating Pressure: up to 207 bar (3000 psi)

Flow: up to 38 lpm (10 gpm); see performance chart
Internal Leakage: 82 cc/minute (5 cu. in/minute) maximum to 90% of nominal setting
Standard Spring Ranges: 5.5 to 27.6 bar (80 to 400 psi); 13.8 to 55.2 bar (200 to 800 psi);
   20.7 to 103.4 bar (300 to 1500 psi); 27.6 to 144.8 bar (400 to 2100 psi)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
   -26 to 204°C (-15 to 400°F) with fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110_3w
Cavity Tool: CT10-3xx; See page 8.600.1
Seal Kit: SK10-3x-TB; See page 8.650.1


PS10-32 Flow Pressure

PS10-32 Valve Dimensions


Cartridge: Weight: 0.27 kg (0.60 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard. Anodized aluminum knobs and caps.

Standard Ported Body:
Weight: 0.36 kg (0.80 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ. See page 8.010_3w.

Adjustment Option Details:
See page 6.003.1

PS10-32 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for PS10-32. Request a quote.