Electro-Proportional Valves — Flow Control HyPerformance™

HSP12-47H — Spool-Type, 4-Way, 3-Position
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

HSP12-47H Valve

SYMBOL:HSP12-47H Valve symbol

 

DESCRIPTION
A high pressure, proportional, 4 port, 3 position, spool type, screw-in, cartridge style,
hydraulic solenoid valve.

OPERATION
When de-energized, the HSP12-47H blocks flow to port 3, while allowing flow from port 2
to port 1 and port 4 to port 1 through a bleed orifice. When the S1 coil is energized, flow is
allowed from port 3 to 4 and from 2 to 1. When the S2 coil is energized, flow is allowed from
port 3 to 2 and 4 to 1. In circuits where work port flows are unequal due to cylinder ratios, the
higher return flow should be directed to port 4.
Manual Override Option: The manual override feature is intended for emergency use,
not continuous operation. For normal valve operation (neutral) the manual override pin
must be seated in the center detent groove (ID groove on knob is in-line with top of coil nut).
To shift the valve manually from neutral to activate the S1 coil, push the knob down slightly,
rotate 90 degrees counterclockwise, then pull. To detent in this position, rotate the knob an
additional 90 degrees counterclockwise to lock in the upper detent groove. To shift manually
to activate the S2 coil, push the knob down all the way. To detent in this position, rotate the
knob 90 degrees clockwise to lock in the lower detent groove.

FEATURES
• Manual override options.
• Continuous-duty rated coil.
• Efficient wet-armature construction.
• Waterproof E-Coils rated up to IP69K.
• All HyPerformance products are tested to NFPA specification T2.6.1.
and are tested at a verification level of 90% and an assurance of 99%

RATINGS
Operating Pressure: 350 bar (5075 psi); 10% Cycle Life: 420 bar (6090 psi)
   Inlet at port 1: 276 bar (4000 psi) Max.
   Note: All HyPerformance™ products are tested for 900K cycles at 350 bar
   and 100K at 420 bar.
Proof Pressure: 690 bar (10,000 psi)
Burst Pressure: 1380 bar (20,000 psi)
Flow: see performance curves
Maximum Control (Threshold) Current: 1.2 amps for 12 VDC coil
Threshold Current (Nominal): HSP12-47H: S1 - 0.43 A; S2 - 0.33A for 12 VDC coil
   HSP12-47HX: S1 - 0.41 A; S2 - 0.31A for 12 VDC coil
Internal Leakage: Ports 3 to 1: 10 cu. in3./minute (164 ml/min) at 350 bar (5000 psi) de-energized
Dither Frequency: 100 Hz
Temperature: -40 to 100 °C (-40 to 212 °F) with urethane seals;
   -26 to 204 °C (-15 to 400 °F) with urethane seals;
   -54 to 107 °C (-65 to 225 °F) with urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
  7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC12-4; See page 9.112.1_4w
Cavity Tool: HCT12-4XX; See page 8.600.1
Seal Kit: HSK12-4N-MMM (Buna N); HSK12-4V-MMM (fluorocarbon);
   HSK12-4U-000 (urethane); See page 8.650.1
Coil Nut: Part No. 4553800

RECOMMENDED ELECTRONIC CONTROLLERS
The EVDR Series controllers are recommended for use with most HydraForce proportional valves.
These newer electronic controllers are versatile, reliable, and easily configured and customized
for a wide range of applications. See the EVDR Product Selection Guide.



 

 

PERFORMANCE:

HSP12-47H Performance graphs

 

HSP12-47H Typ Press Responce Charts

 



HSP12-47H Flow vs Current Charts

 

HSP12-47H Typ Pressure Drop Chart
DIMENSIONS:

HSP10-47C Valve Dimensions

 

 

MATERIALS:

Cartridge: Weight (without coil and nut):
0.44 kg (0.96 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces.
Urethane seals without back-up rings standard.

Standard Ported Body:
Weight: 5.0 kg (11.11 lb); H-series ductile iron standard. Rated to 345 bar (5000 psi).
See page 8.012.1_4w.

E-Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_12-size.

 

ORDERING CHART:

HSP12-47H Ordering Chart