Electro-Proportional Valves — Directional Control

SP10-58C — Spool-Type, 5-Way, 3-Position
for Brake Release applications
  Selection guide - similar valves.
  PDF file of this page.
  STP file for SP10-58C.
  Request a quote.

SP10-58C Valve

SYMBOL:SP10-58C Valve symbol
A solenoid-operated, 5-way, 3-position, spool-type, screw-in hydraulic
cartridge valve with integral brake release port.

When de-energized, the SP10-58C allows flow between ports 3 and 1.
When coil #1 is energized, flow is allowed from 5 to 2, and from 4 to 3.
When coil #2 is energized, flow is allowed from 5 to 4, and from 2 to 3.
Load sense is connected to port 5 when the spool is in shifted positions.
Note: If low voltage is expected on the machine, 12 or 24 volt systems wil
require the use of 10 volt or 20 volt coils respectively.
See "SP Valves and Coil Operating Parameters," page 2.002.1_pdf.

• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
• Cartridges are voltage interchangeable.

Operating Pressure: 250 bar (3625 psi)
Flow: Up to 22.7 lpm (6 gpm)
Internal Leakage: 246 cc/minute (15 cu. in./minute) max. at 207 bar (3000 psi)
   - SP10-58C; 164 ml/min (10 cu.in./min) - SP10-58CX
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals;
   -54° to 104°C (-65° to 225°F) with Polyurethane seals
Coil Duty Rating: Continuous up to 115% of nominal voltage
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-5; See page 9.110.1_5w
Cavity Tool: CT10-5xx; See page 8.600.1
Seal Kit: SK10-5x-MMMM; See page 8.650.1
Coil Nut: Part No. 7004400
Coil Spacer: Std. D-Coil Spacer Part No. 7009280; E-Coil Spacer Part No. 4539700;
If cartridge is ordered "Less Coil," D-Coil spacer will be provided unless an E is specified
in the Coil Termination To Order section

The EVDR Series controllers are recommended for use with most HydraForce proportional valves.
These newer electronic controllers are versatile, reliable, and easily configured and customized
for a wide range of applications. See the EVDR Product Selection Guide.
For other Electronic Controllers, see page 2.001.1_pdf




SP10-58C Performance graph 1


SP10-58C Performance graph 2


SP10-58C Performance graph 3



SP10-58C Valve Dimensions



Cartridge: Weight: 0.36 kg (0.80 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and back-ups standard.

Standard Ported Body: Weight: 0.41 kg
(0.85 lb); Anodized high-strength 6061 T6
aluminum alloy, rated to 207 bar (3000 psi);
Ductile iron bodies available; dimensions may
differ. See page 8.010.1_5w.

Standard D-Coil: Weight each: 0.27 kg
(0.60 lb); Unitized thermoplastic
encapsulated, Class H high temperature
magnetwire. See page 3.200.1_10-size.

E-Coil: Weight: 0.41 kg (0.9 lb); Perfect
wound, fully encapsulated with rugged
external metal shell; Rated up to IP69K
with integral connectors.
See page 3.400.1_10-size.



SP10-58C Ordering Chart Manual Override Options