Electro-Proportional Valves — Flow Control HyPerformance™

HSPEC12-30A — Proportional Flow Control Vave
with Integral Compensator
  Features and Benefits
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

HSPEC12-30A Valve

SYMBOL:HSPEC12-30A Valve symbol


A high pressure, proportional, solenoid-operated, 3-way, normally-closed, flow control, screw-in
hydraulic cartridge valve intended for post-compensated applications with load-sense systems. In post-
compensated systems, the load-sense port 1 of the HSPEC12-30A valve is connected to the highest
load, which maintains flow sharing when flow demand exceeds flow supply. Pressure compensation
value of the valve defined as pressure difference between inlet and load sense ports is provided by
appropriate setup of a pump load sense control or by additional pressure compensator valve, one for
the whole system, in case the pump is non-adjustable.

When de-energized, the HSPEC12-30A blocks flow from port 3 to port 2. The valve will regulate flow out
of port 2 regardless of load pressure with flow rate proportional to current applied to the solenoid.

• Integral post-compensator.
• Integral load-sense.
• Reduced manifold space claim.
• Efficient wet-armature construction.
• Continuous-duty rated coils.
• E-Coils rated up to IP69K.
• Flow sharing possible
• All HyPerformance™ valves are tested to the rigorous standards of NFPA specification T2.6.1 and
  are tested at a verfication level of 90% and an assurance of 99%

Operating Pressure: 350 bar (5075 psi); 10% cycle life; 420 bar (6090 psi)
   Note: All HyPerformance™ products are tested for 900K cycles at 350 bar and 100K at 420 bar.
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1241 bar (18000 psi)
Flow: 70 lpm (18.5 gpm) at 150 psi (10.3 bar) compensation value
Internal Leakage: Port 3 to port 2 or port 1 to port 2: 7 drops/minute with
   350 bar (5075 psi) at port 3.
Temperature: -54° to 107°C (-65° to 225° F) with urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC12-3; See page 9.112.1_3w
Cavity Tool: HCT12-3S; See page 8.600.1
Seal Kit: SK12-3U-0; See page 8.650.1




HSPEC12-30A Performance graph 1



HSPEC12-30A Valve Dimensions


Cartridge: Weight: (without coil and nut):
0.32 kg (0.70 lb); With Manual Override:
0.33 kg (0.72 lb) Steel with hardened work surfaces. Zinc-plated exposed surfaces. PPDI
urethane seals without back-up rings standard.

E-Coil: Weight: 0.41 kg (0.9 lb); Fully encapsulated with rugged external metal shell. Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.

Ported Body: Weight: 4.05 kg (8.93 lb)
H-series ductile iron standard. Rated to
345 bar (5000 psi). See page 8.012.1_3w.



HSPEC12-30A Ordering Chart