Electro-Proportional Valves — Flow Control

PFR70-33F — Flow Regulator, Normally Closed, Priority Bypass
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

PFR70-33F Valve symbol Attention Manifold Designers:
To obtain these high flow capabilities using proportional flow controls and compensators, optimized cavity drillings are required. Please consult factory.
A pressure-compensated electrically-variable three-port flow regulator that is a priority
bypass-type control. This combination valve uses a PV70-33x proportional cartridge
and an EC10-40 compensator.

The PFR70-33x-F will bypass all flow out port 3 when de-energized at the pressure
compensator spring value. When energized, this proportional valve/compensator package
will increase and regulate flow out of port 2, regardless of system working pressure, with
an increasing current applied to the solenoid.
Manual Override: To Engage: Turn clockwise
approximately 1 turn to reach start point. Continue another approximately 5 turns to full shift.
To Disengage: Turn counterclockwise approximately 6 turns until positive stop is found.

• Excellent linearity and hysteresis characteristics.
• Hardened spool and cage for long life.
• Optional control orifice sizes.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage-interchangeable.
• Unitized, molded coil design.
• Coil waterproofing standard.
• Screw-in manual override option.

Operating Pressure: 207 bar (3000 psi)
Pressure Rise: Pressure at 1 begins to rise higher than the compensating pressure differential
   when bypass flow exceeds 26.5 lpm (7 gpm)
Internal Leakage: 410 cc/min. (25 cu. in./min.) fully closed at 207 bar (3000 psi) out port 2
Electrical: 2 standard voltage ratings:
Threshold Current Max. Control Current
Coil Voltage A & B Range C Range A & B Range C Range
12 VDC 300 ±70 mA 360 ±70 mA 1500 ±200 mA 1400 ±200 mA
24 VDC 150 ±35 mA 180 ±35 mA 750 ±100 mA 700 ±100 mA
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1




PFR70-33E Valve Flow Performance chart


PFR70-33F Valve Flow Performance chart



PFR70-33E Valve Dimensions



Cartridge: Steel with hardened work
surfaces. Zinc-plated exposed surfaces;
Buna N O-rings and back-ups standard.

Standard Ported Body: Anodized
high-strength 6061 T6 aluminum alloy,
rated to 207 bar (3000 psi); Ductile iron
bodies available; dimensions may differ.
Consult factory.

70-Size D-Coil:
See page 3.200.1_70-size.

70-Size E-Coil:
See page 3.400.1_70-size.

Package Weight: 2.27 kg (5 lb)

Seal Kit:
SK10-3x-MM (PV valve)
SK10-4x-TMB (EC valve)



PFR70-33F Ordering