Electro-Proportional Valves — Flow Control

PFR72-33L — Flow Regulator, Normally Closed
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

PFR72-33J Valve symbol

Attention Manifold Designers:

To obtain these high flow capabilities using proportional flow controls and compensators, optimized cavity drillings are required. Please consult factory.
A pressure-compensated electrically-variable three-port flow regulator that normally
closed when de-energized. This combination valve uses a PV72-33x proportional cartridge
and an EC12-30 compensator.

This proportional valve/compensator package will regulate flow out of port 2 regardless of
system working pressure. With an increasing current applied to the solenoid, the PFR72-33x-L
will increase output flow.
Manual Override: To Engage: Turn clockwise approximately 1 turn to reach start point.
Continue another approximately 5 turns to full shift.
To Disengage: Turn counterclockwise approximately 6 turns until positive stop is found.

• Excellent linearity and hysteresis characteristics.
• Hardened spool and cage for long life.
• Optional control orifice sizes.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage-interchangeable.
• Unitized, molded coil design.
• Coil waterproofing standard.
• Screw-in manual override option.

Operating Pressure: 207 bar (3000 psi)
Internal Leakage: 492 cc/min. (30 cu. in./min.) fully closed at 207 bar (3000 psi) out port 2
Electrical: 2 standard voltage ratings:
Coil Voltage Threshold Current Max. Control Current
12 VDC 300 ±200 mA 1500 ±100 mA
24 VDC 150 ±35 mA 750 ±100 mA
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1



Regulated Flow Delivered out Port 2; 24 volt coil used (for 12 volt coils, double the amp values shown); 100 Hz Dither; PWM Control

PFR72-33L Valve Flow Performance chart



PFR72-33L Valve Dimensions



Cartridge: Steel with hardened work
surfaces. Zinc-plated exposed surfaces;
Buna N O-rings and back-ups standard.

Standard Ported Body: Anodized
high-strength 6061 T6 aluminum alloy,
rated to 207 bar (3000 psi); Ductile iron
bodies available; dimensions may differ.
Consult factory.

70-Size D-Coil:
See page 3.200.1_70-size.

70-Size E-Coil:
See page 3.400.1_70-size.

Package Weight: 3.18 kg (7 lb)

Seal Kit:
SK12-3x-MM (PV valve)
SK12-3x-TB (EC valve)



PFR72-33L Ordering