Solenoid-Operated On/Off Valve — HyPerformance™

HSV10-24 — Spool-Type, 2-Way, Bi-directional
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

HSV10-24 Valve

HSV10-24 Valve symbol


A solenoid-operated, 2-way, spool-type, screw-in hydraulic cartridge valve designed for
bi-directional blocking in high pressure applications.

When de-energized, the HSV10-24 blocks flow in both directions. When energized, the
valve opens to allow bi-directional flow.

• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Waterproof E-Coils rated up to IP69K.
• Unitized, molded coil design.
• 1000-hour salt-spray rated solenoid tubes and coils.
• All HyPerformance products are tested to NFPA specification T2.6.1 and are tested
  at a verification level of 90% and an assurance of 99%.

Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
   Note: all HyPerformance products are tested for 900K cycles at 350 bar and 100K cycles
   at 420 bar.
Proof Pressure: 690 bar (10,000 psi)
Burst Pressure: 1380 bar (20,000 psi)
Flow: Up to 30.3 lpm (8 gpm)
Maximum Internal Leakage (at 350 bar/5075 psi): Port 2 to 1: 50 ml/minute (3.1 cu. in/minute);
   Port 1 to 2: 250 ml/minute (15.3 cu. in/minute)
Temperature: -54° to 107°C (-65° to 225°F) with urethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20°C: 1.7 amps at 12 VDC; 0.85 amps at 24 VDC
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC10-2; See page 9.110.1_2w
Cavity Tool: HCT10-2xx See page 8.600.1
Seal Kit: SK10-2U-O; See page 8.650.1
Coil Nut: Part No. 4555250




HSV10-24 Valve Performance Chart



HSV10-24 Valve Dimensions



Cartridge: Weight: 0.19 kg (0.41 lb);
Steel with hardened work surfaces. Zinc-plated exposed surfaces; Urethane O-ring without
back-up standard.

Ported Body: Weight: 1.19 kg (2.62 lb); HyPerformance™ Ductile iron (code 'D')
standard. Rated to 345 bar (5000 psi).
See page 8.010.1_2w.

E-Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.



HSV10-24 Ordering Chart 10-size E-Coil

Selection guide - similar valves.
PDF file of this page. Request a quote.