- Services & Support
- Sales & Distribution
Solenoid-Operated On/Off Valve
SV08-28 — Bi-Directional Blocking, 2-Way, Normally Closed
Selection guide - similar valves.|
PDF file of this page.
STP file for SV08-28.
Request a quote.
A solenoid-operated, 2-way, normally closed, poppet-type, bi-directional blocking, direct-acting, screw-in hydraulic cartridge valve for low leakage in load-holding applications.
When de-energized, the SV08-28 blocks flow in both directions. When energized the poppet opens to allow flow in both directions.
Operation of Manual Override Option: To override, push and hold override button.
• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Cartridges are voltage interchangeable.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
• Industry common cavity – compact size.
Operating Pressure: 207 bar (3000 psi)
Flow: Up to 11.4 lpm (3.0 gpm)
Internal Leakage: 0.16 cc/minute (5 drops/minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with standard Buna seals;
-54 to 104 °C (-65° to 225 °F) with Polyurethane seals;
-26 to 204 °C (-15° to 400 °F) with Fluorocarbon seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied
at 80% of nominal flow rating (2 to 1 direction): Energized: 50 msec. De-energized: 16 msec.
Initial Coil Current Draw at 20 °C: Standard Coil: 1.2 amps at 12 Vdc;
0.13 amps at 115 Vac (full wave rectified).
E-Coil: 1.4 amps at 12 Vdc; 0.7 amps at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: If using an orifice disc with this product, an offset orifice disc is required; See page 9.020.1
Cavity: VC08-2; See page 9.108.1_2w
Cavity Tool: CT08-2xx; See page 8.600.1
Seal Kit: SK08-2x-M; See page 8.650.1
Coil Nut: Part No. 7004400
Cartridge: Weight: 0.18 kg (0.40 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and polyester elastomer back-up standard.
Standard Ported Body: Weight: 0.16 kg (0.35 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.
See page 8.008.1_2w.
Standard D-Coil: Weight each: 0.11 kg (0.25 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_08-size.
E-Coil: Weight: 0.14 kg (0.3 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_08-size.
|Selection guide - similar valves.
||PDF file of this page.||STP file for SV08-28.||Request a quote.|