- Services & Support
- Sales & Distribution
Solenoid-Operated On/Off Valve
SV12-29 — Poppet, 2-Way, Normally Open, Bi-Directional Blocking
Selection guide - similar valves.|
PDF file of this page.
STP file for SV12-29.
Request a quote.
A solenoid-operated, 2-way, normally open, internally piloted, poppet-type, bi-directional blocking, screw-in hydraulic cartridge valve designed for low leakage in load-holding applications.
When de-energized, the SV12-29 allows flow in both directions. When energized, the valve's poppet closes, blocking flow in both directions.
• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
• Cost-effective cavity.
Operating Pressure: 240 bar (3500 psi)
Flow: Up to 113.6 lpm (30 gpm)
Internal Leakage: 0.15 cc/minute (3 drops/minute) max. at 240 bar (3500 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
-26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals.
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage.
Response Time: First indication of change of state with 100% voltage supplied
at 80% of nominal flow rating: Energized: 60 ms De-energized: 15 ms
Initial Coil Current Draw at 20 °C: Standard Coil: 1.67 amps at 12 Vdc;
0.18 amps at 115 Vac (full wave rectified).
E-Coil: 1.7 amps at 12 Vdc; 0.85 amps at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC12-2; See page 9.112.1_2w
Cavity Tool: CT12-2xx See page 8.600.1
Seal Kit: SK12-2x-M; See page 8.650.1
Coil Nut: Part No. 7004420
Cartridge: Weight: 0.25 kg (0.55 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and polyester elastomer back-up standard.
Standard Ported Body: Weight: 0.57 kg (1.25 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.
See page 8.012.1_2w.
Standard D-Coil: Weight each: 0.27 kg (0.60 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_10-size.
E-Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.
|Selection guide - similar valves.
||PDF file of this page.||STP file for SV12-29.||Request a quote.|