- Services & Support
- Sales & Distribution
Solenoid-Operated On/Off Valve
SVCV08-21 — Poppet, 2-Way, Normally Closed,
Selection guide - similar valves.|
PDF file of this page.
STP file for SVCV08-21.
Valve Features and Benefits
Request a quote.
A solenoid-operated, 2-way, normally open, poppet-type, bi-directional blocking, pilot-operated,
screw-in hydraulic cartridge valve with outlet flow check designed for low leakage in load-holding
When energized, the SVCV08-21 blocks flow in both directions. When de-energized the poppet opens
to allow flow from
the VC08-3 cavity with the normal inlet at cavity port 3 (valve port 2), the outlet at cavity port 1 (valve port 1),
and cavity port 2 blocked.
Operation of Manual Override Option: To override, push and hold override button.
• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Cartridges are voltage interchangeable.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
• Industry common cavity – compact size.
Operating Pressure: 207 (3000 psi)
Flow: Up to 22.7 lpm (6 gpm)
Reverse Flow Check Valve Spring: 0.69 (10 psi)
Internal Leakage: 2 to 1: 5 drops/minute max. at 207 (3000 psi);
1 to 2: 10 drops/minute max. at 207 (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with standard Buna seals;
-26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied
at 80% of nominal flow rating: Energized: 40 ms De-energized: 46 ms
Initial Coil Current Draw at 20°C: Standard Coil: 1.2 amps at 12 Vdc;
0.13 amps at 115 Vac (full wave rectified).
E-Coil: 1.4 amps at 12 Vdc; 0.7 amps at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-3; See page 9.108.1_3w
Cavity Tool: CT08-3xx; See page 8.600.1
Seal Kit: SK08-3x-M; See page 8.650.1
Coil Nut: Part No. 7004400
Cartridge: Weight: 0.11 kg (0.25 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and back-ups standard.
Standard Ported Body: Weight: 0.27 kg (0.60 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 (3000 psi); Ductile iron bodies available; dimensions may differ.
See page 8.008.1_3w.
Standard D-Coil: Weight each: 0.11 kg (0.25 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_08-size.
E-Coil: Weight: 0.14 kg (0.3 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_08-size.
|Selection guide - similar valves.
||PDF file of this page.||STP file for SVCV08-21.||Valve Features and Benefits.||Request a quote.|