Solenoid-Operated On/Off Valve
SV10-34 — Spool-Type, 3-Way
Selection guide - similar valves.
PDF file of this page.
STP file for SV10-34.
Request a quote.
A solenoid-operated, 3-way, spool-type, direct-acting, screw-in hydraulic directional cartridge valve.
When de-energized, the SV10-34 allows flow from
the cartridge’s spool shifts to open flow from
pressurized, it is not intended to be used as the inlet.
Operation of Manual Override Option: To override, push button in, twist counterclockwise 180°.
The internal spring will push the button out. In this position, the valve may be only partially shifted.
To assure full override shift, pull the button out to its fullest extension and hold it in this position.
To return to normal operation, push button in, twist clockwise 180°, and release. Override will be
detented in this position.
• Continuous-duty rated coil.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• All ports may be fully pressurized.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E‑Coils rated up to IP69K.
• Industry common cavity.
Operating Pressure: 207 bar (3000 psi)
Proof Pressure: 350 bar (5075 psi)
Flow: Up to 22.7 lpm (6 gpm); under certain operating conditions this valve may be
rated for higher flow; consult factory
Internal Leakage: 115 cc/minute (7 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
-26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied
at 80% of nominal flow rating: Energized: 60 ms De-energized: 10 ms
Initial Coil Current Draw at 20 °C: Standard Coil: 1.2 A at 12 Vdc;
0.13 A at 115 Vac (full wave rectified).
E‑Coil: 1.4 A at 12 Vdc; 0.7 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110.1_3w
Cavity Tool: CT10-3xx; See page 8.600.1
Seal Kit: SK10-3x-MM; See page 8.650.1
Coil Nut: Part No. 7004400
Cartridge: Weight: 0.14 kg (0.30 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and polyester elastomer back-up standard.
Standard Ported Body: Weight: 0.36 kg (0.80 lb); Anodized high-strength 6061 T6 aluminum alloy, rate to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.
See page 8.010.1_3w.
Standard D-Coil: Weight each: 0.27 kg (0.60 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_10-size.
E‑Coil: Weight: 0.14 kg (0.3 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.
|Selection guide - similar valves.
||PDF file of this page.||STP file for SV10-34.||Request a quote.|