Solenoid-Operated On/Off Valve

SV07-35 — Spool-Type, 3-Way, Compact Size
  Selection guide - similar valves.
  PDF file of this page.
  STP file for SV07-35.
  Request a quote.

SV07-34 Valve
SYMBOL:
SV07-35 Valve symbol

 

DESCRIPTION
A solenoid-operated, 3-way, spool-type, direct-acting, screw-in hydraulic directional cartridge valve.

OPERATION
When de-energized, the SV07-35 blocks flow at 1 while allowing flow between 2 and 3. When energized,
the cartridge’s spool shifts to allow flow between 1 and 2, while blocking 3.

FEATURES
• Continuous-duty rated coil.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• All ports may be fully pressurized.
• Unitized, molded coil design.
• Optional waterproof E‑Coils rated up to IP69K.
• Compact size.

RATINGS
Operating Pressure: 207 bar (3000 psi)
Flow: Up to 11 lpm (3 gpm)
Internal Leakage: 41 cc/minute (2.5 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
  -26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20 °C: Standard Coil: 1.2 A at 12 Vdc;
   0.13 A at 115 Vac (full wave rectified).
   E‑Coil: 1.4 A at 12 Vdc; 0.7 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
  7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No Restrictions; See page 9.020.1
Cavity: VC07-3; See page 9.107.1_3w
Cavity Tool: CT07-3xx; See page 8.600.1
Seal Kit: SK07-3x-MM; See page 8.650.1
Coil Nut: Part No. 7004400

 

 


PERFORMANCE:

SV07-35 Valve Performance Chart

 

DIMENSIONS:

SV07-35 Valve Dimensions

 

MATERIALS:

Cartridge: Weight: 0.09 kg (0.20 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O­rings and back-ups standard.

Standard D-Coil: Weight each: 0.11 kg (0.25 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_08-size.

E-Coil: Weight: 0.14 kg (0.3 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_08-size.

 

ORDERING CHART:

SV07-35 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for SV07-35. Request a quote.