Solenoid-Operated On/Off Valve

SV08-35 — Spool-Type, 3-Way
  Selection guide - similar valves.
  PDF file of this page.
  STP file for SV08-35.
  Request a quote.

SV08-31 Valve
SYMBOL:
SV08-35 Valve symbol
DESCRIPTION
A solenoid-operated, 3-way, spool-type, direct-acting, screw-in hydraulic directional cartridge valve.

OPERATION
When de-energized, the SV08-35 allows flow between 2 and 3 while blocking flow at 1. When energized,
the cartridge’s spool shifts to open flow from 2 to 1, while blocking 3. While port 1 may be fully pressurized,
it is not intended to be used as the inlet.

FEATURES
• Continuous-duty rated coil.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• All ports may be fully pressurized.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E‑Coils rated up to IP69K.
• Industry common cavity – Compact size.

RATINGS
Operating Pressure: 207 bar (3000 psi)
Flow: Up to 11 lpm (3 gpm)
Internal Leakage: 98 cc/minute (6 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
   -26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals;
   -54 to 104 °C (-65 to 225 °F) with Polyurethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20 °C: Standard Coil: 1.2 A at 12 Vdc;
   0.13 A at 115 Vac (full wave rectified).
   E‑Coil: 1.4 A at 12 Vdc; 0.7 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
  7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-3; See page 9.108.1_3w
Cavity Tool: CT08-3xx; See page 8.600.1
Seal Kit: SK08-3x-MM; See page 8.650.1
Coil Nut: Part No. 7004400

PERFORMANCE:

SV08-35 Valve Performance Chart
  DIMENSIONS:

SV08-35 Valve Dimensions

MATERIALS:

Cartridge: Weight: 0.09 kg (0.20 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and back-ups standard.

Standard Ported Body: Weight: 0.27 kg (0.60 lb); Anodized high-strength 6061 T6 aluminum alloy, rate to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.
See page 8.008.1_3w.

Standard D-Coil: Weight each: 0.11 kg (0.25 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_08-size.

E‑Coil: Weight: 0.14 kg (0.3 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_08-size.
  ORDERING CHART:

SV08-35 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for SV08-35. Request a quote.