- Services & Support
- Sales & Distribution
Solenoid-Operated On/Off Valve — HyPerformance™
HSV10-40R — Spool-Type, 4-Way, 2-Position
Selection guide - similar valves.|
PDF file of this page.
Request a quote.
A solenoid-operated, 4-way, 2-position, spool-type, direct-acting, screw-in hydraulic
cartridge valve for
applications requiring high pressure operation.
When de-energized, the HSV10-40R allows flow between 2 and 1, and between 3 and 4.
When energized, the cartridge’s spool shifts to open flow between 3 and 2, and between 4 and 1.
Consult factory for applications where port 4 will be used as the inlet.
Operation of Manual Override Option: The manual override feature is intended for emergency use,
not continuous duty operation. To override, push button in and twist counterclockwise 180°. The
internal spring will push the button out. In this position, the valve may be only partially shifted. To
assure full override shift, pull the button out to its fullest extension and hold it in this position. To return
to normal valve function, push button in, twist clockwise 180° and release. Override will be detented in
• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• All ports may be fully pressurized.
• Cartridges are voltage interchangeable.
• Waterproof E‑Coils rated up to IP69K.
• Unitized, molded coil design.
• Corrosion-resistant plating.
• All HyPerformance products are tested to NFPA specification T2.6.1
and are tested at a verification level of 90% and an assurance of 99%.
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Note: all HyPerformance products are tested for 900K cycles at 350 bar and 100K cycles at 420 bar.
Burst Pressure: 1380 bar (20,000 psi)
Flow: Up to 22.7 lpm (6 gpm)
Max. Internal Leakage:
Port 3 to 1: De-energized: 245 ml/minute (15 cu. in./minute.) at 350 bar (5075 psi);
Port 3 to 1: Energized: 164 ml/minute (10 cu. in./minute.) at 350 bar (5075 psi);
Port 1 to 3: De-energized: 164 ml/minute (10 cu. in./minute.) at 350 bar (5075 psi);
Port 1 to 3: Energized: 245 ml/minute (15 cu. in./minute.) at 350 bar (5075 psi)
Temperature: -54 to 107 °C (-65 to 225 °F) with Urethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20 °C: 1.7 A at 12 Vdc; 0.85 A at 24 Vdc
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC10-4; See page 9.110.1_4w
Cavity Tool: HCT10-4xx; See page 8.600.1
Seal Kit: SK10-4U-OOO; See page 8.650.1
Coil Nut: Part No. 4555250
Cartridge: Weight: 0.21 kg (0.47 lb); Steel with hardened work surfaces. Corrosion-resistant zinc-nickel plated exposed surfaces; Urethane O‑ring without back-ups standard.
Ported Body: Weight: 1.70 kg (3.76 lb); H‑series ductile iron standard. Rated to 350 bar (5075 psi).
See page 8.010.1_4w.
E‑Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.
|Selection guide - similar valves.
||PDF file of this page.||Request a quote.|