- Services & Support
- Sales & Distribution
Solenoid-Operated On/Off Valve
SV08-43 — Spool-Type, 4-Way, 2-Position
Selection guide - similar valves.
PDF file of this page.
STP file for SV08-43.
Request a quote.
A solenoid-operated, 4-way, 2-position, spool-type, direct-acting, screw-in hydraulic cartridge valve.
When de-energized, the SV08-43 allows flow from 4 to 1, while blocking flow between 3 and 2.
When energized, the spool shifts to allow flow between 3 and 4, and from 1 to 2.
NOTE: While port 1 may be fully pressurized, it is not intended for use as the inlet port.
• Continuous-duty rated coil.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• All ports may be fully pressurized.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E‑Coils rated up to IP69K.
• Industry-common cavity – compact size.
Operating Pressure: 207 bar (3000 psi)
Flow: Up to 11 lpm (3 gpm)
Internal Leakage: 82 cc/minute (5 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
-26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20 °C: Standard Coil: 1.2 A at 12 Vdc;
0.13 A at 115 Vac (full wave rectified).
E‑Coil: 1.4 A at 12 Vdc; 0.7 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-4; See page 9.108.1_4w
Cavity Tool: CT08-4xx; See page 8.600.1
Seal Kit: SK08-4x-MMM; See page 8.650.1
Coil Nut: Part No. 7004400
Cartridge: Weight: 0.13 kg (0.28 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and back-ups standard.
Standard Ported Body: Weight: 0.27 kg (0.60 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.
See page 8.008.1_4w.
Standard D-Coil: Weight each: 0.11 kg (0.25 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_08-size.
E‑Coil: Weight: 0.14 kg (0.3 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_08-size.
|Selection guide - similar valves.
||PDF file of this page.||STP file for SV08-43.||Request a quote.|