Solenoid-Operated On/Off Valve — HyPerformance™

HSV10-47C — Spool-Type, 4-Port, 3-Position, Closed Center
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

HSV10-47C Valve
U.S. Patent 8,253,063

HSV10-47C Valve symbol
A solenoid-operated, 4-port, 3-position, direct-acting, spool-type, closed center,
screw-in hydraulic cartridge valve for use in high pressure applications.

When de-energized, the HSV10-47C blocks flow to all ports. When coil #1 is energized,
flow is allowed from 3 to 4, and from 2 to 1. When coil #2 is energized, flow is allowed
from 3 to 2, and from 4 to 1. In circuits where work port flows are unequal due to cylinder
ratios, the higher return flow should be directed to port 2.

• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Manual override option.
• Corrosion-resistant plating.
• Waterproof E‑Coils rated up to IP69K.
• All ports may be fully pressurized.
• Unitized, molded coil design.
• Industry common cavity.
• All HyPerformance products are tested to the rigorous standards of the NFPA specification T2.6.1.
• All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.

Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
  Note: all HyPerformance products are tested for 900K cycles at 350 bar and 100K cycles at 420 bar.
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20,000 psi)
Flow: With inlet at Port 3: 37.9 lpm (10 gpm); With inlet at Port 1: 11.36 lpm (3 gpm)
Internal Leakage: 245 ml/minute (15 cu. in./minute) max. at 350 bar (5075 psi) de-energized
Temperature: -54 to 107 °C (-65 to 225 °F) with Urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
  7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC10-4; See page 9.110.1_4w
Cavity Tool:
HCT10-4xx; See page 8.600.1
Seal Kit: SK10-4x-000; See page 8.650.1

HSV10-47C Valve Performance Chart


HSV10-47C  Dimension Drawing

Cartridge: Weight (without coil and nut): 0.28 kg (0.61 lb); Steel with hardened work surfaces. Corrosion-resistant zinc-nickel plated exposed surfaces; urethane seals without back-ups standard.

Standard Ported Body:
Weight: 1.71 kg (3.76 lb); H‑series ductile iron standard. Rated to 350 bar (5075 psi).
See page 8.010.1_4w.

E‑Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.

HSV10-47C Ordering Chart 10-size E‑Coil

Selection guide - similar valves.
PDF file of this page. Request a quote.