Solenoid-Operated On/Off Valve — HyPerformance

HSV12-47C — Spool-Type, 4-Port, 3-Position, Closed Center
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

HSV12-47C Valve
U.S. Patent 8,253,063

SYMBOL:
HSV12-47C Valve symbol
DESCRIPTION
A solenoid-operated, 4-port, 3-position, direct-acting, spool-type, closed center, screw-in hydraulic cartridge valve for use in high pressure applications.

OPERATION
When de-energized, the HSV12-47C blocks flow to all ports. When coil #1 is energized, flow is allowed from 3 to 4, and from 2 to 1. When coil #2 is energized, flow is allowed from 3 to 2, and from 4 to 1. In circuits where work port flows are unequal due to cylinder ratios, the higher return flow should be directed to port 2.
Manual Override Option:The manual override feature is intended for emergency use, not for continuous operation. For normal valve operation (neutral), the manual override pin mus be seated in the center detent groove (ID groove on knob is in-line with top of coil nut). To shift the valve manually from neutral to activate coil S1 function, push the knob down slightly, rotate 90 degrees counterclockwise and pull. To detent in this position, rotate the knob an additional 90 degrees counterclockwise to lock in the upper detent groove. To shift manually from neutral to activate coil S2 function, push the knob down all the way to detent. In this position, rotate the knob ninety degrees clockwise to lock in the lower detent groove.


FEATURES
• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Manual override option.
• Waterproof E‑Coils rated up to IP69K.
• Corrosion-resistant plating.
• All ports may be fully pressurized.
• Unitized, molded coil design.
• All HyPerformance products are tested to the rigorous standards of the NFPA specification T2.6.1.
• All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.

RATINGS
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
  Note: all HyPerformance products are tested for 900K cycles at 350 bar and 100K cycles at 420 bar.
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20,000 psi)
Flow: 57 lpm (15 gpm)
Internal Leakage: Ports 3 to 1: 164 ml/min (10 cu.in./min) at 350 bar (5075) de-energized
Temperature: -54 to 107 °C (-65 to 225 °F) with Urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
  7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC12-4
Cavity Tool: HCT12-4xx; See page 8.600.1
Seal Kit: SK12-4U-000; See page 8.650.1

PERFORMANCE: HSV12-47C Valve Performance Chart   DIMENSIONS:
HSV12-47C  Dimension Drawing

MATERIALS:

Cartridge: Weight (without coil, spacer and nut): 0.39 kg (0.87 lb); with manual override M: 0.40 kg (0.89 lb.); with manual override B: 0.42 kg (0.94 lb). Steel with hardened work surfaces. corrosion-resistant zinc-nickel plated exposed surfaces; urethane seals without back-ups standard.

Standard Ported Body:
Weight: 5.04 kg (11.13 lb) H‑series ductile iron standard. Rated to 350 bar (5075 psi).
See page 8.012.1_4w.

E‑Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.
  ORDERING CHART:

HSV12-47C Ordering Chart 10-size E‑Coil

Selection guide - similar valves.
PDF file of this page. Request a quote.